-----------------------------------------------------------------
[*] Emulating binary name: gpioset
[*] Emulator used: qemu-mipsel-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/11108416-13869836.lzma_extract/lzma.uncompressed_extract/3761304-11775640.cpio_portable_ascii_extract (1/2)
[*] Using CPU config: NONE
[*] Emulating binary: /usr/bin/gpioset
[*] Emulating binary ./usr/bin/gpioset with parameter NONE
Input error
Please input:./jzgpioset port bit value
Write :./jzgpioset a 12 1
Read :./jzgpioset a 12
Please input:./jzgpioset port bit INT MASK PAT1 PAT0
Write :./jzgpioset a 12 0 1 0 1
INT MASK PAT1 PAT0 Port Description
1 0 0 0 Port is low level triggered interrupt input.
1 0 0 1 Port is high level triggered interrupt input.
1 0 1 0 Port is fall edge triggered interrupt input.
1 0 1 1 Port is rise edge triggered interrupt input.
1 1 0 0 Port is low level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 0 1 Port is high level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 0 Port is fall edge triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 1 Port is rise edge triggered interrupt input. Interrupt is masked. Flag is recorded.
0 0 0 0 Port is pin of device 0.
0 0 0 1 Port is pin of device 1.
0 0 1 0 Port is pin of device 2.
0 0 1 1 Port is pin of device 3.
0 1 0 0 Port is GPIO output 0.
0 1 0 1 Port is GPIO output 1.
0 1 1 * Port is GPIO input.
[*] Emulating binary ./usr/bin/gpioset with parameter -v
Input error
Please input:./jzgpioset port bit value
Write :./jzgpioset a 12 1
Read :./jzgpioset a 12
Please input:./jzgpioset port bit INT MASK PAT1 PAT0
Write :./jzgpioset a 12 0 1 0 1
INT MASK PAT1 PAT0 Port Description
1 0 0 0 Port is low level triggered interrupt input.
1 0 0 1 Port is high level triggered interrupt input.
1 0 1 0 Port is fall edge triggered interrupt input.
1 0 1 1 Port is rise edge triggered interrupt input.
1 1 0 0 Port is low level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 0 1 Port is high level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 0 Port is fall edge triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 1 Port is rise edge triggered interrupt input. Interrupt is masked. Flag is recorded.
0 0 0 0 Port is pin of device 0.
0 0 0 1 Port is pin of device 1.
0 0 1 0 Port is pin of device 2.
0 0 1 1 Port is pin of device 3.
0 1 0 0 Port is GPIO output 0.
0 1 0 1 Port is GPIO output 1.
0 1 1 * Port is GPIO input.
[*] Emulating binary ./usr/bin/gpioset with parameter -V
Input error
Please input:./jzgpioset port bit value
Write :./jzgpioset a 12 1
Read :./jzgpioset a 12
Please input:./jzgpioset port bit INT MASK PAT1 PAT0
Write :./jzgpioset a 12 0 1 0 1
INT MASK PAT1 PAT0 Port Description
1 0 0 0 Port is low level triggered interrupt input.
1 0 0 1 Port is high level triggered interrupt input.
1 0 1 0 Port is fall edge triggered interrupt input.
1 0 1 1 Port is rise edge triggered interrupt input.
1 1 0 0 Port is low level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 0 1 Port is high level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 0 Port is fall edge triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 1 Port is rise edge triggered interrupt input. Interrupt is masked. Flag is recorded.
0 0 0 0 Port is pin of device 0.
0 0 0 1 Port is pin of device 1.
0 0 1 0 Port is pin of device 2.
0 0 1 1 Port is pin of device 3.
0 1 0 0 Port is GPIO output 0.
0 1 0 1 Port is GPIO output 1.
0 1 1 * Port is GPIO input.
[*] Emulating binary ./usr/bin/gpioset with parameter -h
Input error
Please input:./jzgpioset port bit value
Write :./jzgpioset a 12 1
Read :./jzgpioset a 12
Please input:./jzgpioset port bit INT MASK PAT1 PAT0
Write :./jzgpioset a 12 0 1 0 1
INT MASK PAT1 PAT0 Port Description
1 0 0 0 Port is low level triggered interrupt input.
1 0 0 1 Port is high level triggered interrupt input.
1 0 1 0 Port is fall edge triggered interrupt input.
1 0 1 1 Port is rise edge triggered interrupt input.
1 1 0 0 Port is low level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 0 1 Port is high level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 0 Port is fall edge triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 1 Port is rise edge triggered interrupt input. Interrupt is masked. Flag is recorded.
0 0 0 0 Port is pin of device 0.
0 0 0 1 Port is pin of device 1.
0 0 1 0 Port is pin of device 2.
0 0 1 1 Port is pin of device 3.
0 1 0 0 Port is GPIO output 0.
0 1 0 1 Port is GPIO output 1.
0 1 1 * Port is GPIO input.
[*] Emulating binary ./usr/bin/gpioset with parameter -help
Input error
Please input:./jzgpioset port bit value
Write :./jzgpioset a 12 1
Read :./jzgpioset a 12
Please input:./jzgpioset port bit INT MASK PAT1 PAT0
Write :./jzgpioset a 12 0 1 0 1
INT MASK PAT1 PAT0 Port Description
1 0 0 0 Port is low level triggered interrupt input.
1 0 0 1 Port is high level triggered interrupt input.
1 0 1 0 Port is fall edge triggered interrupt input.
1 0 1 1 Port is rise edge triggered interrupt input.
1 1 0 0 Port is low level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 0 1 Port is high level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 0 Port is fall edge triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 1 Port is rise edge triggered interrupt input. Interrupt is masked. Flag is recorded.
0 0 0 0 Port is pin of device 0.
0 0 0 1 Port is pin of device 1.
0 0 1 0 Port is pin of device 2.
0 0 1 1 Port is pin of device 3.
0 1 0 0 Port is GPIO output 0.
0 1 0 1 Port is GPIO output 1.
0 1 1 * Port is GPIO input.
[*] Emulating binary ./usr/bin/gpioset with parameter --help
Input error
Please input:./jzgpioset port bit value
Write :./jzgpioset a 12 1
Read :./jzgpioset a 12
Please input:./jzgpioset port bit INT MASK PAT1 PAT0
Write :./jzgpioset a 12 0 1 0 1
INT MASK PAT1 PAT0 Port Description
1 0 0 0 Port is low level triggered interrupt input.
1 0 0 1 Port is high level triggered interrupt input.
1 0 1 0 Port is fall edge triggered interrupt input.
1 0 1 1 Port is rise edge triggered interrupt input.
1 1 0 0 Port is low level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 0 1 Port is high level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 0 Port is fall edge triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 1 Port is rise edge triggered interrupt input. Interrupt is masked. Flag is recorded.
0 0 0 0 Port is pin of device 0.
0 0 0 1 Port is pin of device 1.
0 0 1 0 Port is pin of device 2.
0 0 1 1 Port is pin of device 3.
0 1 0 0 Port is GPIO output 0.
0 1 0 1 Port is GPIO output 1.
0 1 1 * Port is GPIO input.
[*] Emulating binary ./usr/bin/gpioset with parameter --version
Input error
Please input:./jzgpioset port bit value
Write :./jzgpioset a 12 1
Read :./jzgpioset a 12
Please input:./jzgpioset port bit INT MASK PAT1 PAT0
Write :./jzgpioset a 12 0 1 0 1
INT MASK PAT1 PAT0 Port Description
1 0 0 0 Port is low level triggered interrupt input.
1 0 0 1 Port is high level triggered interrupt input.
1 0 1 0 Port is fall edge triggered interrupt input.
1 0 1 1 Port is rise edge triggered interrupt input.
1 1 0 0 Port is low level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 0 1 Port is high level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 0 Port is fall edge triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 1 Port is rise edge triggered interrupt input. Interrupt is masked. Flag is recorded.
0 0 0 0 Port is pin of device 0.
0 0 0 1 Port is pin of device 1.
0 0 1 0 Port is pin of device 2.
0 0 1 1 Port is pin of device 3.
0 1 0 0 Port is GPIO output 0.
0 1 0 1 Port is GPIO output 1.
0 1 1 * Port is GPIO input.
[*] Emulating binary ./usr/bin/gpioset with parameter version
Input error
Please input:./jzgpioset port bit value
Write :./jzgpioset a 12 1
Read :./jzgpioset a 12
Please input:./jzgpioset port bit INT MASK PAT1 PAT0
Write :./jzgpioset a 12 0 1 0 1
INT MASK PAT1 PAT0 Port Description
1 0 0 0 Port is low level triggered interrupt input.
1 0 0 1 Port is high level triggered interrupt input.
1 0 1 0 Port is fall edge triggered interrupt input.
1 0 1 1 Port is rise edge triggered interrupt input.
1 1 0 0 Port is low level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 0 1 Port is high level triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 0 Port is fall edge triggered interrupt input. Interrupt is masked. Flag is recorded.
1 1 1 1 Port is rise edge triggered interrupt input. Interrupt is masked. Flag is recorded.
0 0 0 0 Port is pin of device 0.
0 0 0 1 Port is pin of device 1.
0 0 1 0 Port is pin of device 2.
0 0 1 1 Port is pin of device 3.
0 1 0 0 Port is GPIO output 0.
0 1 0 1 Port is GPIO output 1.
0 1 1 * Port is GPIO input.
-----------------------------------------------------------------