-----------------------------------------------------------------
[*] Emulating binary name: ubiformat
[*] Emulator used: qemu-arm-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/56048-12514271.gzip_extract/gzip.uncompressed_extract/5243916-15068666.gzip_extract/gzip.uncompressed_extract (1/1)
[*] Using CPU config: NONE
[*] Emulating binary: /usr/sbin/ubiformat
[*] Emulating binary ./usr/sbin/ubiformat with parameter NONE
libmtd: error!: cannot get information about "NONE"
error 2 (No such file or directory)
ubiformat: error!: cannot get information about "NONE"
error 2 (No such file or directory)
[*] Emulating binary ./usr/sbin/ubiformat with parameter -v
ubiformat: error!: MTD device name was not specified (use -h for help)
[*] Emulating binary ./usr/sbin/ubiformat with parameter -V
ubiformat (mtd-utils) 2.1.0
[*] Emulating binary ./usr/sbin/ubiformat with parameter -h
ubiformat version 2.1.0 - a tool to format MTD devices and flash UBI images
Usage: ubiformat <MTD device node file name> [-s <bytes>] [-O <offs>] [-n]
[-Q <num>] [-f <file>] [-S <bytes>] [-e <value>] [-x <num>] [-y] [-q] [-v] [-h]
[--sub-page-size=<bytes>] [--vid-hdr-offset=<offs>] [--no-volume-table]
[--flash-image=<file>] [--image-size=<bytes>] [--erase-counter=<value>]
[--image-seq=<num>] [--ubi-ver=<num>] [--yes] [--quiet] [--verbose]
[--help] [--version]
Example 1: ubiformat /dev/mtd0 -y - format MTD device number 0 and do
not ask questions.
Example 2: ubiformat /dev/mtd0 -q -e 0 - format MTD device number 0,
be quiet and force erase counter value 0.
-s, --sub-page-size=<bytes> minimum input/output unit used for UBI
headers, e.g. sub-page size in case of NAND
flash (equivalent to the minimum input/output
unit size by default)
-O, --vid-hdr-offset=<offs> offset if the VID header from start of the
physical eraseblock (default is the next
minimum I/O unit or sub-page after the EC
header)
-f, --flash-image=<file> flash image file, or '-' for stdin
-S, --image-size=<bytes> bytes in input, if not reading from file
-e, --erase-counter=<value> use <value> as the erase counter value for all
eraseblocks
-x, --ubi-ver=<num> UBI version number to put to EC headers
(default is 1)
-Q, --image-seq=<num> 32-bit UBI image sequence number to use
(by default a random number is picked)
-y, --yes assume the answer is "yes" for all question
this program would otherwise ask
-q, --quiet suppress progress percentage information
-v, --verbose be verbose
-h, -?, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubiformat with parameter -help
ubiformat version 2.1.0 - a tool to format MTD devices and flash UBI images
Usage: ubiformat <MTD device node file name> [-s <bytes>] [-O <offs>] [-n]
[-Q <num>] [-f <file>] [-S <bytes>] [-e <value>] [-x <num>] [-y] [-q] [-v] [-h]
[--sub-page-size=<bytes>] [--vid-hdr-offset=<offs>] [--no-volume-table]
[--flash-image=<file>] [--image-size=<bytes>] [--erase-counter=<value>]
[--image-seq=<num>] [--ubi-ver=<num>] [--yes] [--quiet] [--verbose]
[--help] [--version]
Example 1: ubiformat /dev/mtd0 -y - format MTD device number 0 and do
not ask questions.
Example 2: ubiformat /dev/mtd0 -q -e 0 - format MTD device number 0,
be quiet and force erase counter value 0.
-s, --sub-page-size=<bytes> minimum input/output unit used for UBI
headers, e.g. sub-page size in case of NAND
flash (equivalent to the minimum input/output
unit size by default)
-O, --vid-hdr-offset=<offs> offset if the VID header from start of the
physical eraseblock (default is the next
minimum I/O unit or sub-page after the EC
header)
-f, --flash-image=<file> flash image file, or '-' for stdin
-S, --image-size=<bytes> bytes in input, if not reading from file
-e, --erase-counter=<value> use <value> as the erase counter value for all
eraseblocks
-x, --ubi-ver=<num> UBI version number to put to EC headers
(default is 1)
-Q, --image-seq=<num> 32-bit UBI image sequence number to use
(by default a random number is picked)
-y, --yes assume the answer is "yes" for all question
this program would otherwise ask
-q, --quiet suppress progress percentage information
-v, --verbose be verbose
-h, -?, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubiformat with parameter --help
ubiformat version 2.1.0 - a tool to format MTD devices and flash UBI images
Usage: ubiformat <MTD device node file name> [-s <bytes>] [-O <offs>] [-n]
[-Q <num>] [-f <file>] [-S <bytes>] [-e <value>] [-x <num>] [-y] [-q] [-v] [-h]
[--sub-page-size=<bytes>] [--vid-hdr-offset=<offs>] [--no-volume-table]
[--flash-image=<file>] [--image-size=<bytes>] [--erase-counter=<value>]
[--image-seq=<num>] [--ubi-ver=<num>] [--yes] [--quiet] [--verbose]
[--help] [--version]
Example 1: ubiformat /dev/mtd0 -y - format MTD device number 0 and do
not ask questions.
Example 2: ubiformat /dev/mtd0 -q -e 0 - format MTD device number 0,
be quiet and force erase counter value 0.
-s, --sub-page-size=<bytes> minimum input/output unit used for UBI
headers, e.g. sub-page size in case of NAND
flash (equivalent to the minimum input/output
unit size by default)
-O, --vid-hdr-offset=<offs> offset if the VID header from start of the
physical eraseblock (default is the next
minimum I/O unit or sub-page after the EC
header)
-f, --flash-image=<file> flash image file, or '-' for stdin
-S, --image-size=<bytes> bytes in input, if not reading from file
-e, --erase-counter=<value> use <value> as the erase counter value for all
eraseblocks
-x, --ubi-ver=<num> UBI version number to put to EC headers
(default is 1)
-Q, --image-seq=<num> 32-bit UBI image sequence number to use
(by default a random number is picked)
-y, --yes assume the answer is "yes" for all question
this program would otherwise ask
-q, --quiet suppress progress percentage information
-v, --verbose be verbose
-h, -?, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubiformat with parameter --version
ubiformat (mtd-utils) 2.1.0
[*] Emulating binary ./usr/sbin/ubiformat with parameter version
libmtd: error!: cannot get information about "version"
error 2 (No such file or directory)
ubiformat: error!: cannot get information about "version"
error 2 (No such file or directory)
-----------------------------------------------------------------