-----------------------------------------------------------------
[*] Emulating binary name: flash_erase
[*] Emulator used: qemu-arm-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/56048-12514271.gzip_extract/gzip.uncompressed_extract/5243916-15068666.gzip_extract/gzip.uncompressed_extract (1/1)
[*] Using CPU config: NONE
[*] Emulating binary: /usr/sbin/flash_erase
[*] Emulating binary ./usr/sbin/flash_erase with parameter NONE
flash_erase: error!: no start erase block specified
flash_erase: error!: no erase block count specified
flash_erase: error!: Try `--help' for more information
[*] Emulating binary ./usr/sbin/flash_erase with parameter -v
./usr/sbin/flash_erase: invalid option -- v
flash_erase: error!: no MTD device specified
flash_erase: error!: no start erase block specified
flash_erase: error!: no erase block count specified
flash_erase: error!: Try `--help' for more information
[*] Emulating binary ./usr/sbin/flash_erase with parameter -V
flash_erase (mtd-utils) 2.1.0
Copyright (C) 2000 Arcom Control Systems Ltd
flash_erase comes with NO WARRANTY
to the extent permitted by law.
You may redistribute copies of flash_erase
under the terms of the GNU General Public Licence.
See the file `COPYING' for more information.
[*] Emulating binary ./usr/sbin/flash_erase with parameter -h
Usage: flash_erase [options] MTD_DEVICE <start offset> <block count>
Erase blocks of the specified MTD device.
Specify a count of 0 to erase to end of device.
-j, --jffs2 format the device for jffs2
-N, --noskipbad don't skip bad blocks
-u, --unlock unlock sectors before erasing
-q, --quiet do not display progress messages
--silent same as --quiet
--help display this help and exit
--version output version information and exit
[*] Emulating binary ./usr/sbin/flash_erase with parameter -help
Usage: flash_erase [options] MTD_DEVICE <start offset> <block count>
Erase blocks of the specified MTD device.
Specify a count of 0 to erase to end of device.
-j, --jffs2 format the device for jffs2
-N, --noskipbad don't skip bad blocks
-u, --unlock unlock sectors before erasing
-q, --quiet do not display progress messages
--silent same as --quiet
--help display this help and exit
--version output version information and exit
[*] Emulating binary ./usr/sbin/flash_erase with parameter --help
Usage: flash_erase [options] MTD_DEVICE <start offset> <block count>
Erase blocks of the specified MTD device.
Specify a count of 0 to erase to end of device.
-j, --jffs2 format the device for jffs2
-N, --noskipbad don't skip bad blocks
-u, --unlock unlock sectors before erasing
-q, --quiet do not display progress messages
--silent same as --quiet
--help display this help and exit
--version output version information and exit
[*] Emulating binary ./usr/sbin/flash_erase with parameter --version
flash_erase (mtd-utils) 2.1.0
Copyright (C) 2000 Arcom Control Systems Ltd
flash_erase comes with NO WARRANTY
to the extent permitted by law.
You may redistribute copies of flash_erase
under the terms of the GNU General Public Licence.
See the file `COPYING' for more information.
[*] Emulating binary ./usr/sbin/flash_erase with parameter version
flash_erase: error!: no start erase block specified
flash_erase: error!: no erase block count specified
flash_erase: error!: Try `--help' for more information
-----------------------------------------------------------------