-----------------------------------------------------------------
[*] Emulating binary name: pppd
[*] Emulator used: qemu-mipsel-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/1568982-13971496.squashfs_v4_le_extract (1/1)
[*] Using CPU config:
[*] Emulating binary: /usr/sbin/pppd
[*] Change permissions +x to /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/1568982-13971496.squashfs_v4_le_extract/./usr/sbin/pppd.
[*] Emulating binary ./usr/sbin/pppd with parameter NONE
./usr/sbin/pppd: unrecognized option 'NONE'
pppd version 2.4.7
Usage: ./usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
[*] Emulating binary ./usr/sbin/pppd with parameter -v
./usr/sbin/pppd: unrecognized option '-v'
pppd version 2.4.7
Usage: ./usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
[*] Emulating binary ./usr/sbin/pppd with parameter -V
./usr/sbin/pppd: unrecognized option '-V'
pppd version 2.4.7
Usage: ./usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
[*] Emulating binary ./usr/sbin/pppd with parameter -h
pppd version 2.4.7
Usage: ./usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
[*] Emulating binary ./usr/sbin/pppd with parameter -help
./usr/sbin/pppd: unrecognized option '-help'
pppd version 2.4.7
Usage: ./usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
[*] Emulating binary ./usr/sbin/pppd with parameter --help
[*] Emulating binary ./usr/sbin/pppd with parameter --version
pppd version 2.4.7
Usage: ./usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
pppd version 2.4.7
[*] Emulating binary ./usr/sbin/pppd with parameter version
./usr/sbin/pppd: unrecognized option 'version'
-----------------------------------------------------------------
pppd version 2.4.7
Usage: ./usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
