-----------------------------------------------------------------
[*] Emulating binary name: rotatelogs
[*] Emulator used: qemu-arm-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-80367616.squashfs_v4_le_extract (1/2)
[*] Using CPU config:
[*] Emulating binary: /usr/sbin/rotatelogs
[*] Change permissions +x to /logs/s115_usermode_emulator/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-80367616.squashfs_v4_le_extract/./usr/sbin/rotatelogs.
[*] Emulating binary ./usr/sbin/rotatelogs with parameter NONE
Incorrect number of arguments
Usage: ./usr/sbin/rotatelogs [-vlfDtTec] [-L linkname] [-p prog] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
Add this:
TransferLog "|./usr/sbin/rotatelogs /some/where 86400"
or
TransferLog "|./usr/sbin/rotatelogs /some/where 5M"
to httpd.conf. By default, the generated name will be
<logfile>.nnnn where nnnn is the system time at which the log
nominally starts (N.B. if using a rotation time, the time will
always be a multiple of the rotation time, so you can synchronize
cron scripts with it). If <logfile> contains strftime conversion
specifications, those will be used instead. At the end of each
rotation time or when the file size is reached a new log is
started.
Options:
-v Verbose operation. Messages are written to stderr.
-l Base rotation on local time instead of UTC.
-L path Create hard link from current log to specified path.
-p prog Run specified program after opening a new log file. See below.
-f Force opening of log on program start.
-D Create parent directories of log file.
-t Truncate logfile instead of rotating, tail friendly.
-T Truncate logfiles opened for rotation, but not the initial logfile.
-e Echo log to stdout for further processing.
-c Create log even if it is empty.
-n num Rotate file by adding suffixes '.1', '.2', ..., '.num'.
The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
where <curfile> is the filename of the newly opened logfile, and
<prevfile>, if given, is the filename of the previously used logfile.
[*] Emulating binary ./usr/sbin/rotatelogs with parameter -v
Incorrect number of arguments
Usage: ./usr/sbin/rotatelogs [-vlfDtTec] [-L linkname] [-p prog] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
Add this:
TransferLog "|./usr/sbin/rotatelogs /some/where 86400"
or
TransferLog "|./usr/sbin/rotatelogs /some/where 5M"
to httpd.conf. By default, the generated name will be
<logfile>.nnnn where nnnn is the system time at which the log
nominally starts (N.B. if using a rotation time, the time will
always be a multiple of the rotation time, so you can synchronize
cron scripts with it). If <logfile> contains strftime conversion
specifications, those will be used instead. At the end of each
rotation time or when the file size is reached a new log is
started.
Options:
-v Verbose operation. Messages are written to stderr.
-l Base rotation on local time instead of UTC.
-L path Create hard link from current log to specified path.
-p prog Run specified program after opening a new log file. See below.
-f Force opening of log on program start.
-D Create parent directories of log file.
-t Truncate logfile instead of rotating, tail friendly.
-T Truncate logfiles opened for rotation, but not the initial logfile.
-e Echo log to stdout for further processing.
-c Create log even if it is empty.
-n num Rotate file by adding suffixes '.1', '.2', ..., '.num'.
The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
where <curfile> is the filename of the newly opened logfile, and
<prevfile>, if given, is the filename of the previously used logfile.
[*] Emulating binary ./usr/sbin/rotatelogs with parameter -V
rotatelogs: illegal option -- V
Usage: ./usr/sbin/rotatelogs [-vlfDtTec] [-L linkname] [-p prog] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
Add this:
TransferLog "|./usr/sbin/rotatelogs /some/where 86400"
or
TransferLog "|./usr/sbin/rotatelogs /some/where 5M"
to httpd.conf. By default, the generated name will be
<logfile>.nnnn where nnnn is the system time at which the log
nominally starts (N.B. if using a rotation time, the time will
always be a multiple of the rotation time, so you can synchronize
cron scripts with it). If <logfile> contains strftime conversion
specifications, those will be used instead. At the end of each
rotation time or when the file size is reached a new log is
started.
Options:
-v Verbose operation. Messages are written to stderr.
-l Base rotation on local time instead of UTC.
-L path Create hard link from current log to specified path.
-p prog Run specified program after opening a new log file. See below.
-f Force opening of log on program start.
-D Create parent directories of log file.
-t Truncate logfile instead of rotating, tail friendly.
-T Truncate logfiles opened for rotation, but not the initial logfile.
-e Echo log to stdout for further processing.
-c Create log even if it is empty.
-n num Rotate file by adding suffixes '.1', '.2', ..., '.num'.
The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
where <curfile> is the filename of the newly opened logfile, and
<prevfile>, if given, is the filename of the previously used logfile.
[*] Emulating binary ./usr/sbin/rotatelogs with parameter -h
rotatelogs: illegal option -- h
Usage: ./usr/sbin/rotatelogs [-vlfDtTec] [-L linkname] [-p prog] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
Add this:
TransferLog "|./usr/sbin/rotatelogs /some/where 86400"
or
TransferLog "|./usr/sbin/rotatelogs /some/where 5M"
to httpd.conf. By default, the generated name will be
<logfile>.nnnn where nnnn is the system time at which the log
nominally starts (N.B. if using a rotation time, the time will
always be a multiple of the rotation time, so you can synchronize
cron scripts with it). If <logfile> contains strftime conversion
specifications, those will be used instead. At the end of each
rotation time or when the file size is reached a new log is
started.
Options:
-v Verbose operation. Messages are written to stderr.
-l Base rotation on local time instead of UTC.
-L path Create hard link from current log to specified path.
-p prog Run specified program after opening a new log file. See below.
-f Force opening of log on program start.
-D Create parent directories of log file.
-t Truncate logfile instead of rotating, tail friendly.
-T Truncate logfiles opened for rotation, but not the initial logfile.
-e Echo log to stdout for further processing.
-c Create log even if it is empty.
-n num Rotate file by adding suffixes '.1', '.2', ..., '.num'.
The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
where <curfile> is the filename of the newly opened logfile, and
<prevfile>, if given, is the filename of the previously used logfile.
[*] Emulating binary ./usr/sbin/rotatelogs with parameter -help
rotatelogs: illegal option -- h
Usage: ./usr/sbin/rotatelogs [-vlfDtTec] [-L linkname] [-p prog] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
Add this:
TransferLog "|./usr/sbin/rotatelogs /some/where 86400"
or
TransferLog "|./usr/sbin/rotatelogs /some/where 5M"
to httpd.conf. By default, the generated name will be
<logfile>.nnnn where nnnn is the system time at which the log
nominally starts (N.B. if using a rotation time, the time will
always be a multiple of the rotation time, so you can synchronize
cron scripts with it). If <logfile> contains strftime conversion
specifications, those will be used instead. At the end of each
rotation time or when the file size is reached a new log is
started.
Options:
-v Verbose operation. Messages are written to stderr.
-l Base rotation on local time instead of UTC.
-L path Create hard link from current log to specified path.
-p prog Run specified program after opening a new log file. See below.
-f Force opening of log on program start.
-D Create parent directories of log file.
-t Truncate logfile instead of rotating, tail friendly.
-T Truncate logfiles opened for rotation, but not the initial logfile.
-e Echo log to stdout for further processing.
-c Create log even if it is empty.
-n num Rotate file by adding suffixes '.1', '.2', ..., '.num'.
The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
where <curfile> is the filename of the newly opened logfile, and
<prevfile>, if given, is the filename of the previously used logfile.
[*] Emulating binary ./usr/sbin/rotatelogs with parameter --help
Incorrect number of arguments
Usage: ./usr/sbin/rotatelogs [-vlfDtTec] [-L linkname] [-p prog] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
Add this:
TransferLog "|./usr/sbin/rotatelogs /some/where 86400"
or
TransferLog "|./usr/sbin/rotatelogs /some/where 5M"
to httpd.conf. By default, the generated name will be
<logfile>.nnnn where nnnn is the system time at which the log
nominally starts (N.B. if using a rotation time, the time will
always be a multiple of the rotation time, so you can synchronize
cron scripts with it). If <logfile> contains strftime conversion
specifications, those will be used instead. At the end of each
rotation time or when the file size is reached a new log is
started.
Options:
-v Verbose operation. Messages are written to stderr.
-l Base rotation on local time instead of UTC.
-L path Create hard link from current log to specified path.
-p prog Run specified program after opening a new log file. See below.
-f Force opening of log on program start.
-D Create parent directories of log file.
-t Truncate logfile instead of rotating, tail friendly.
-T Truncate logfiles opened for rotation, but not the initial logfile.
-e Echo log to stdout for further processing.
-c Create log even if it is empty.
-n num Rotate file by adding suffixes '.1', '.2', ..., '.num'.
The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
where <curfile> is the filename of the newly opened logfile, and
<prevfile>, if given, is the filename of the previously used logfile.
[*] Emulating binary ./usr/sbin/rotatelogs with parameter --version
Incorrect number of arguments
Usage: ./usr/sbin/rotatelogs [-vlfDtTec] [-L linkname] [-p prog] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
Add this:
TransferLog "|./usr/sbin/rotatelogs /some/where 86400"
or
TransferLog "|./usr/sbin/rotatelogs /some/where 5M"
to httpd.conf. By default, the generated name will be
<logfile>.nnnn where nnnn is the system time at which the log
nominally starts (N.B. if using a rotation time, the time will
always be a multiple of the rotation time, so you can synchronize
cron scripts with it). If <logfile> contains strftime conversion
specifications, those will be used instead. At the end of each
rotation time or when the file size is reached a new log is
started.
Options:
-v Verbose operation. Messages are written to stderr.
-l Base rotation on local time instead of UTC.
-L path Create hard link from current log to specified path.
-p prog Run specified program after opening a new log file. See below.
-f Force opening of log on program start.
-D Create parent directories of log file.
-t Truncate logfile instead of rotating, tail friendly.
-T Truncate logfiles opened for rotation, but not the initial logfile.
-e Echo log to stdout for further processing.
-c Create log even if it is empty.
-n num Rotate file by adding suffixes '.1', '.2', ..., '.num'.
The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
where <curfile> is the filename of the newly opened logfile, and
<prevfile>, if given, is the filename of the previously used logfile.
[*] Emulating binary ./usr/sbin/rotatelogs with parameter version
Incorrect number of arguments
Usage: ./usr/sbin/rotatelogs [-vlfDtTec] [-L linkname] [-p prog] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
Add this:
TransferLog "|./usr/sbin/rotatelogs /some/where 86400"
or
TransferLog "|./usr/sbin/rotatelogs /some/where 5M"
to httpd.conf. By default, the generated name will be
<logfile>.nnnn where nnnn is the system time at which the log
nominally starts (N.B. if using a rotation time, the time will
always be a multiple of the rotation time, so you can synchronize
cron scripts with it). If <logfile> contains strftime conversion
specifications, those will be used instead. At the end of each
rotation time or when the file size is reached a new log is
started.
Options:
-v Verbose operation. Messages are written to stderr.
-l Base rotation on local time instead of UTC.
-L path Create hard link from current log to specified path.
-p prog Run specified program after opening a new log file. See below.
-f Force opening of log on program start.
-D Create parent directories of log file.
-t Truncate logfile instead of rotating, tail friendly.
-T Truncate logfiles opened for rotation, but not the initial logfile.
-e Echo log to stdout for further processing.
-c Create log even if it is empty.
-n num Rotate file by adding suffixes '.1', '.2', ..., '.num'.
The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
where <curfile> is the filename of the newly opened logfile, and
<prevfile>, if given, is the filename of the previously used logfile.
-----------------------------------------------------------------
