-----------------------------------------------------------------
[*] Emulating binary name: ethtool
[*] Emulator used: qemu-mipsel-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract (1/2)
[*] Using CPU config:
[*] Emulating binary: /usr/sbin/ethtool
[*] Change permissions +x to /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract/./usr/sbin/ethtool.
[*] Emulating binary ./usr/sbin/ethtool with parameter NONE
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/sbin/ethtool with parameter -v
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/sbin/ethtool with parameter -V
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/sbin/ethtool with parameter -h
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/sbin/ethtool with parameter -help
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/sbin/ethtool with parameter --help
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/sbin/ethtool with parameter --version
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/sbin/ethtool with parameter version
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
-----------------------------------------------------------------
-----------------------------------------------------------------
[*] Emulating binary name: ethtool
[*] Emulator used: qemu-mipsel-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract/usr (2/2)
[*] Using CPU config: 24KEc
[*] Emulating binary: /sbin/ethtool
[*] Emulating binary ./sbin/ethtool with parameter NONE and cpu configuration 24KEc
Cannot get device settings: Function not implemented
Cannot get wake-on-lan settings: Function not implemented
Cannot get message level: Function not implemented
Cannot get link status: Function not implemented
Settings for NONE:
No data available
[*] Emulating binary ./sbin/ethtool with parameter -v and cpu configuration 24KEc
ethtool: bad command line argument(s)
For more information run ethtool -h
[*] Emulating binary ./sbin/ethtool with parameter -V and cpu configuration 24KEc
ethtool: bad command line argument(s)
For more information run ethtool -h
[*] Emulating binary ./sbin/ethtool with parameter -h and cpu configuration 24KEc
ethtool version 5.2
Usage:
ethtool DEVNAME Display standard information about device
ethtool -s|--change DEVNAME Change generic options
[ speed %d ]
[ duplex half|full ]
[ port tp|aui|bnc|mii|fibre ]
[ mdix auto|on|off ]
[ autoneg on|off ]
[ advertise %x ]
[ phyad %d ]
[ xcvr internal|external ]
[ wol p|u|m|b|a|g|s|f|d... ]
[ sopass %x:%x:%x:%x:%x:%x ]
[ msglvl %d | msglvl type on|off ... ]
ethtool -a|--show-pause DEVNAME Show pause options
ethtool -A|--pause DEVNAME Set pause options
[ autoneg on|off ]
[ rx on|off ]
[ tx on|off ]
ethtool -c|--show-coalesce DEVNAME Show coalesce options
ethtool -C|--coalesce DEVNAME Set coalesce options
[adaptive-rx on|off]
[adaptive-tx on|off]
[rx-usecs N]
[rx-frames N]
[rx-usecs-irq N]
[rx-frames-irq N]
[tx-usecs N]
[tx-frames N]
[tx-usecs-irq N]
[tx-frames-irq N]
[stats-block-usecs N]
[pkt-rate-low N]
[rx-usecs-low N]
[rx-frames-low N]
[tx-usecs-low N]
[tx-frames-low N]
[pkt-rate-high N]
[rx-usecs-high N]
[rx-frames-high N]
[tx-usecs-high N]
[tx-frames-high N]
[sample-interval N]
ethtool -g|--show-ring DEVNAME Query RX/TX ring parameters
ethtool -G|--set-ring DEVNAME Set RX/TX ring parameters
[ rx N ]
[ rx-mini N ]
[ rx-jumbo N ]
[ tx N ]
ethtool -k|--show-features|--show-offload DEVNAME Get state of protocol offload and other features
ethtool -K|--features|--offload DEVNAME Set protocol offload and other features
FEATURE on|off ...
ethtool -i|--driver DEVNAME Show driver information
ethtool -d|--register-dump DEVNAME Do a register dump
[ raw on|off ]
[ file FILENAME ]
ethtool -e|--eeprom-dump DEVNAME Do a EEPROM dump
[ raw on|off ]
[ offset N ]
[ length N ]
ethtool -E|--change-eeprom DEVNAME Change bytes in device EEPROM
[ magic N ]
[ offset N ]
[ length N ]
[ value N ]
ethtool -r|--negotiate DEVNAME Restart N-WAY negotiation
ethtool -p|--identify DEVNAME Show visible port identification (e.g. blinking)
[ TIME-IN-SECONDS ]
ethtool -t|--test DEVNAME Execute adapter self test
[ online | offline | external_lb ]
ethtool -S|--statistics DEVNAME Show adapter statistics
ethtool --phy-statistics DEVNAME Show phy statistics
ethtool -n|-u|--show-nfc|--show-ntuple DEVNAME Show Rx network flow classification options or rules
[ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 [context %d] |
rule %d ]
ethtool -N|-U|--config-nfc|--config-ntuple DEVNAME Configure Rx network flow classification options or rules
rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r... [context %d] |
flow-type ether|ip4|tcp4|udp4|sctp4|ah4|esp4|ip6|tcp6|udp6|ah6|esp6|sctp6
[ src %x:%x:%x:%x:%x:%x [m %x:%x:%x:%x:%x:%x] ]
[ dst %x:%x:%x:%x:%x:%x [m %x:%x:%x:%x:%x:%x] ]
[ proto %d [m %x] ]
[ src-ip IP-ADDRESS [m IP-ADDRESS] ]
[ dst-ip IP-ADDRESS [m IP-ADDRESS] ]
[ tos %d [m %x] ]
[ tclass %d [m %x] ]
[ l4proto %d [m %x] ]
[ src-port %d [m %x] ]
[ dst-port %d [m %x] ]
[ spi %d [m %x] ]
[ vlan-etype %x [m %x] ]
[ vlan %x [m %x] ]
[ user-def %x [m %x] ]
[ dst-mac %x:%x:%x:%x:%x:%x [m %x:%x:%x:%x:%x:%x] ]
[ action %d ] | [ vf %d queue %d ]
[ context %d ]
[ loc %d]] |
delete %d
ethtool -T|--show-time-stamping DEVNAME Show time stamping capabilities
ethtool -x|--show-rxfh-indir|--show-rxfh DEVNAME Show Rx flow hash indirection table and/or RSS hash key
[ context %d ]
ethtool -X|--set-rxfh-indir|--rxfh DEVNAME Set Rx flow hash indirection table and/or RSS hash key
[ context %d|new ]
[ equal N | weight W0 W1 ... | default ]
[ hkey %x:%x:%x:%x:%x:.... ]
[ hfunc FUNC ]
[ delete ]
ethtool -f|--flash DEVNAME Flash firmware image from the specified file to a region on the device
FILENAME [ REGION-NUMBER-TO-FLASH ]
ethtool -P|--show-permaddr DEVNAME Show permanent hardware address
ethtool -w|--get-dump DEVNAME Get dump flag, data
[ data FILENAME ]
ethtool -W|--set-dump DEVNAME Set dump flag of the device
N
ethtool -l|--show-channels DEVNAME Query Channels
ethtool -L|--set-channels DEVNAME Set Channels
[ rx N ]
[ tx N ]
[ other N ]
[ combined N ]
ethtool --show-priv-flags DEVNAME Query private flags
ethtool --set-priv-flags DEVNAME Set private flags
FLAG on|off ...
ethtool -m|--dump-module-eeprom|--module-info DEVNAME Query/Decode Module EEPROM information and optical diagnostics if available
[ raw on|off ]
[ hex on|off ]
[ offset N ]
[ length N ]
ethtool --show-eee DEVNAME Show EEE settings
ethtool --set-eee DEVNAME Set EEE settings
[ eee on|off ]
[ advertise %x ]
[ tx-lpi on|off ]
[ tx-timer %d ]
ethtool --set-phy-tunable DEVNAME Set PHY tunable
[ downshift on|off [count N] ]
[ fast-link-down on|off [msecs N] ]
ethtool --get-phy-tunable DEVNAME Get PHY tunable
[ downshift ]
[ fast-link-down ]
ethtool --reset DEVNAME Reset components
[ flags %x ]
[ mgmt ]
[ mgmt-shared ]
[ irq ]
[ irq-shared ]
[ dma ]
[ dma-shared ]
[ filter ]
[ filter-shared ]
[ offload ]
[ offload-shared ]
[ mac ]
[ mac-shared ]
[ phy ]
[ phy-shared ]
[ ram ]
[ ram-shared ]
[ ap ]
[ ap-shared ]
[ dedicated ]
[ all ]
ethtool --show-fec DEVNAME Show FEC settings
ethtool --set-fec DEVNAME Set FEC settings
[ encoding auto|off|rs|baser [...]]
ethtool -Q|--per-queue DEVNAME Apply per-queue command.The supported sub commands include --show-coalesce, --coalesce
[queue_mask %x] SUB_COMMAND
ethtool -h|--help Show this help
ethtool --version Show version number
[*] Emulating binary ./sbin/ethtool with parameter -help and cpu configuration 24KEc
ethtool: bad command line argument(s)
For more information run ethtool -h
[*] Emulating binary ./sbin/ethtool with parameter --help and cpu configuration 24KEc
ethtool version 5.2
Usage:
ethtool DEVNAME Display standard information about device
ethtool -s|--change DEVNAME Change generic options
[ speed %d ]
[ duplex half|full ]
[ port tp|aui|bnc|mii|fibre ]
[ mdix auto|on|off ]
[ autoneg on|off ]
[ advertise %x ]
[ phyad %d ]
[ xcvr internal|external ]
[ wol p|u|m|b|a|g|s|f|d... ]
[ sopass %x:%x:%x:%x:%x:%x ]
[ msglvl %d | msglvl type on|off ... ]
ethtool -a|--show-pause DEVNAME Show pause options
ethtool -A|--pause DEVNAME Set pause options
[ autoneg on|off ]
[ rx on|off ]
[ tx on|off ]
ethtool -c|--show-coalesce DEVNAME Show coalesce options
ethtool -C|--coalesce DEVNAME Set coalesce options
[adaptive-rx on|off]
[adaptive-tx on|off]
[rx-usecs N]
[rx-frames N]
[rx-usecs-irq N]
[rx-frames-irq N]
[tx-usecs N]
[tx-frames N]
[tx-usecs-irq N]
[tx-frames-irq N]
[stats-block-usecs N]
[pkt-rate-low N]
[rx-usecs-low N]
[rx-frames-low N]
[tx-usecs-low N]
[tx-frames-low N]
[pkt-rate-high N]
[rx-usecs-high N]
[rx-frames-high N]
[tx-usecs-high N]
[tx-frames-high N]
[sample-interval N]
ethtool -g|--show-ring DEVNAME Query RX/TX ring parameters
ethtool -G|--set-ring DEVNAME Set RX/TX ring parameters
[ rx N ]
[ rx-mini N ]
[ rx-jumbo N ]
[ tx N ]
ethtool -k|--show-features|--show-offload DEVNAME Get state of protocol offload and other features
ethtool -K|--features|--offload DEVNAME Set protocol offload and other features
FEATURE on|off ...
ethtool -i|--driver DEVNAME Show driver information
ethtool -d|--register-dump DEVNAME Do a register dump
[ raw on|off ]
[ file FILENAME ]
ethtool -e|--eeprom-dump DEVNAME Do a EEPROM dump
[ raw on|off ]
[ offset N ]
[ length N ]
ethtool -E|--change-eeprom DEVNAME Change bytes in device EEPROM
[ magic N ]
[ offset N ]
[ length N ]
[ value N ]
ethtool -r|--negotiate DEVNAME Restart N-WAY negotiation
ethtool -p|--identify DEVNAME Show visible port identification (e.g. blinking)
[ TIME-IN-SECONDS ]
ethtool -t|--test DEVNAME Execute adapter self test
[ online | offline | external_lb ]
ethtool -S|--statistics DEVNAME Show adapter statistics
ethtool --phy-statistics DEVNAME Show phy statistics
ethtool -n|-u|--show-nfc|--show-ntuple DEVNAME Show Rx network flow classification options or rules
[ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 [context %d] |
rule %d ]
ethtool -N|-U|--config-nfc|--config-ntuple DEVNAME Configure Rx network flow classification options or rules
rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r... [context %d] |
flow-type ether|ip4|tcp4|udp4|sctp4|ah4|esp4|ip6|tcp6|udp6|ah6|esp6|sctp6
[ src %x:%x:%x:%x:%x:%x [m %x:%x:%x:%x:%x:%x] ]
[ dst %x:%x:%x:%x:%x:%x [m %x:%x:%x:%x:%x:%x] ]
[ proto %d [m %x] ]
[ src-ip IP-ADDRESS [m IP-ADDRESS] ]
[ dst-ip IP-ADDRESS [m IP-ADDRESS] ]
[ tos %d [m %x] ]
[ tclass %d [m %x] ]
[ l4proto %d [m %x] ]
[ src-port %d [m %x] ]
[ dst-port %d [m %x] ]
[ spi %d [m %x] ]
[ vlan-etype %x [m %x] ]
[ vlan %x [m %x] ]
[ user-def %x [m %x] ]
[ dst-mac %x:%x:%x:%x:%x:%x [m %x:%x:%x:%x:%x:%x] ]
[ action %d ] | [ vf %d queue %d ]
[ context %d ]
[ loc %d]] |
delete %d
ethtool -T|--show-time-stamping DEVNAME Show time stamping capabilities
ethtool -x|--show-rxfh-indir|--show-rxfh DEVNAME Show Rx flow hash indirection table and/or RSS hash key
[ context %d ]
ethtool -X|--set-rxfh-indir|--rxfh DEVNAME Set Rx flow hash indirection table and/or RSS hash key
[ context %d|new ]
[ equal N | weight W0 W1 ... | default ]
[ hkey %x:%x:%x:%x:%x:.... ]
[ hfunc FUNC ]
[ delete ]
ethtool -f|--flash DEVNAME Flash firmware image from the specified file to a region on the device
FILENAME [ REGION-NUMBER-TO-FLASH ]
ethtool -P|--show-permaddr DEVNAME Show permanent hardware address
ethtool -w|--get-dump DEVNAME Get dump flag, data
[ data FILENAME ]
ethtool -W|--set-dump DEVNAME Set dump flag of the device
N
ethtool -l|--show-channels DEVNAME Query Channels
ethtool -L|--set-channels DEVNAME Set Channels
[ rx N ]
[ tx N ]
[ other N ]
[ combined N ]
ethtool --show-priv-flags DEVNAME Query private flags
ethtool --set-priv-flags DEVNAME Set private flags
FLAG on|off ...
ethtool -m|--dump-module-eeprom|--module-info DEVNAME Query/Decode Module EEPROM information and optical diagnostics if available
[ raw on|off ]
[ hex on|off ]
[ offset N ]
[ length N ]
ethtool --show-eee DEVNAME Show EEE settings
ethtool --set-eee DEVNAME Set EEE settings
[ eee on|off ]
[ advertise %x ]
[ tx-lpi on|off ]
[ tx-timer %d ]
ethtool --set-phy-tunable DEVNAME Set PHY tunable
[ downshift on|off [count N] ]
[ fast-link-down on|off [msecs N] ]
ethtool --get-phy-tunable DEVNAME Get PHY tunable
[ downshift ]
[ fast-link-down ]
ethtool --reset DEVNAME Reset components
[ flags %x ]
[ mgmt ]
[ mgmt-shared ]
[ irq ]
[ irq-shared ]
[ dma ]
[ dma-shared ]
[ filter ]
[ filter-shared ]
[ offload ]
[ offload-shared ]
[ mac ]
[ mac-shared ]
[ phy ]
[ phy-shared ]
[ ram ]
[ ram-shared ]
[ ap ]
[ ap-shared ]
[ dedicated ]
[ all ]
ethtool --show-fec DEVNAME Show FEC settings
ethtool --set-fec DEVNAME Set FEC settings
[ encoding auto|off|rs|baser [...]]
ethtool -Q|--per-queue DEVNAME Apply per-queue command.The supported sub commands include --show-coalesce, --coalesce
[queue_mask %x] SUB_COMMAND
ethtool -h|--help Show this help
ethtool --version Show version number
[*] Emulating binary ./sbin/ethtool with parameter --version and cpu configuration 24KEc
ethtool version 5.2
[*] Emulating binary ./sbin/ethtool with parameter version and cpu configuration 24KEc
Cannot get device settings: Function not implemented
Cannot get wake-on-lan settings: Function not implemented
Cannot get message level: Function not implemented
Cannot get link status: Function not implemented
Settings for version:
No data available
-----------------------------------------------------------------
