-----------------------------------------------------------------

[*] Emulating binary name: zeroconf-ip

[*] Emulator used: qemu-mipsel-static

[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract (1/2)

[*] Using CPU config: 

[*] Emulating binary: /usr/sbin/zeroconf-ip

[*] Change permissions +x to /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract/./usr/sbin/zeroconf-ip.

[*] Emulating binary ./usr/sbin/zeroconf-ip with parameter NONE

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/sbin/zeroconf-ip with parameter -v

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/sbin/zeroconf-ip with parameter -V

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/sbin/zeroconf-ip with parameter -h

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/sbin/zeroconf-ip with parameter -help

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/sbin/zeroconf-ip with parameter --help

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/sbin/zeroconf-ip with parameter --version

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/sbin/zeroconf-ip with parameter version

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

-----------------------------------------------------------------

-----------------------------------------------------------------

[*] Emulating binary name: zeroconf-ip

[*] Emulator used: qemu-mipsel-static

[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract/usr (2/2)

[*] Using CPU config: 24KEc

[*] Emulating binary: /sbin/zeroconf-ip

[*] Emulating binary ./sbin/zeroconf-ip with parameter NONE and cpu configuration 24KEc

zeroconf-ip: unrecognized option `NONE'

Try `zeroconf-ip --help' for more information.

[*] Emulating binary ./sbin/zeroconf-ip with parameter -v and cpu configuration 24KEc

zeroconf-ip: unrecognized option `-v'

Try `zeroconf-ip --help' for more information.

[*] Emulating binary ./sbin/zeroconf-ip with parameter -V and cpu configuration 24KEc

zeroconf-ip: unrecognized option `-V'

Try `zeroconf-ip --help' for more information.

[*] Emulating binary ./sbin/zeroconf-ip with parameter -h and cpu configuration 24KEc

zeroconf-ip: unrecognized option `-h'

Try `zeroconf-ip --help' for more information.

[*] Emulating binary ./sbin/zeroconf-ip with parameter -help and cpu configuration 24KEc

zeroconf-ip: unrecognized option `-help'

Try `zeroconf-ip --help' for more information.

[*] Emulating binary ./sbin/zeroconf-ip with parameter --help and cpu configuration 24KEc

Usage: zeroconf-ip [OPTION]...

Configure a link-local IPv4 address dynamically by sending ARP probes according

to the IETF Internet-Draft ``draft-ietf-zeroconf-ipv4-linklocal-07.txt.''

  -i <interface> configure ethernet interface <interface>

  -a <address>   try the link-local address <address> first

  -p             begin probing immediately

  -t             use shorter timeout

  -f <script>    use <script> as configuration script

  -s             suppress all output to the system log

  -d             do not detach from controlling terminal

  -c             complete configuration before detaching

  --help         display this help and exit

  --version      output version information and exit

By default, zeroconf-ip attempts to configure eth0. If the -a option is not

used, the initial address to probe for is selected by scrambling the bits of the

ethernet hardware address. Although a configuration script is always needed, use

of the -f option is not mandatory; if not specified, /sbin/zeroconf-ip.script

is used as a fallback.

Report bugs to <aurer@axis.com>.

[*] Emulating binary ./sbin/zeroconf-ip with parameter --version and cpu configuration 24KEc

zeroconf-ip 1.2.2

[*] Emulating binary ./sbin/zeroconf-ip with parameter version and cpu configuration 24KEc

zeroconf-ip: unrecognized option `version'

Try `zeroconf-ip --help' for more information.

-----------------------------------------------------------------