-----------------------------------------------------------------
[*] Emulating binary name: video-scene-provider
[*] Emulator used: qemu-mipsel-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract (1/2)
[*] Using CPU config:
[*] Emulating binary: /usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider
[*] Change permissions +x to /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract/./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider.
[*] Emulating binary ./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter NONE
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter -v
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter -V
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter -h
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter -help
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter --help
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter --version
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
[*] Emulating binary ./usr/share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter version
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
-----------------------------------------------------------------
-----------------------------------------------------------------
[*] Emulating binary name: video-scene-provider
[*] Emulator used: qemu-mipsel-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract/usr (2/2)
[*] Using CPU config: 24KEc
[*] Emulating binary: /share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider
[*] Emulating binary ./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter NONE and cpu configuration 24KEc
[*] Emulating binary ./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter -v and cpu configuration 24KEc
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider: option requires an argument -- 'v'
Usage:
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider [options]...
Note! Algorithm options will only have effect when running on non-camera sources. That is, they will only have effect when running in dev mode and when the source is either file:// or http://. When running on camera sources these parameters are automatically determined based on the camera properties.
Options are:
-l Log stream selection. Enable this option to use the stdio instead of
syslog. On host this is enabled by default.
-x <execution mode> Execution mode: dbus|dev|capture.
-s <source> Image source: source=<channel-id>|file://file://<filelt;file path>|http://http://<streamlt;stream path>.
-r <resolution> Resolution string, <width>x<height>. If omitted and running on
file original resolution is kept.
-c Enable colorspace ycbcr, default monochrome.
-f <fps> Frame rate scene output.
-b <bps> Burst rate (image input fps).
-m <fps_movie> Frame rate for movie file input. Note! Only used for files.
-t Use parameters optimized for thermal cameras.
-z Enable tracking during PTZ movement.
-v <verbosity> Verbosity level in range {-3:4}. Default 0.
-h Print this help
There are also some environment variables that can be used for development and debug purpose:
MOTE_PLAYBACK_FPS=5.0 can be used when running MOTE on video files to control the playback speed.
MOTE_OUTPUT_FORMAT=xml|objects enables prints of the generated scene. 'xml' will print the scenes in xml format while 'objects' will print the count of objects in the scene.
MOTE_STORE_XML=yes with MOTE_OUTPUT_FORMAT=xml set, will store each scene as an xml file.
MOTE_STATS=1 is used to print MOTE statistics.
MOTE_OUTPUT_IMAGES=all|objects|none controls creating images with scenes visualized in them. 'all' will create images for all analyzed frames, 'objects' only creates images when there are objects in the frame and 'none' will not create any images.
[*] Emulating binary ./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter -V and cpu configuration 24KEc
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider: invalid option -- 'V'
Usage:
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider [options]...
Note! Algorithm options will only have effect when running on non-camera sources. That is, they will only have effect when running in dev mode and when the source is either file:// or http://. When running on camera sources these parameters are automatically determined based on the camera properties.
Options are:
-l Log stream selection. Enable this option to use the stdio instead of
syslog. On host this is enabled by default.
-x <execution mode> Execution mode: dbus|dev|capture.
-s <source> Image source: source=<channel-id>|file://file://<filelt;file path>|http://http://<streamlt;stream path>.
-r <resolution> Resolution string, <width>x<height>. If omitted and running on
file original resolution is kept.
-c Enable colorspace ycbcr, default monochrome.
-f <fps> Frame rate scene output.
-b <bps> Burst rate (image input fps).
-m <fps_movie> Frame rate for movie file input. Note! Only used for files.
-t Use parameters optimized for thermal cameras.
-z Enable tracking during PTZ movement.
-v <verbosity> Verbosity level in range {-3:4}. Default 0.
-h Print this help
There are also some environment variables that can be used for development and debug purpose:
MOTE_PLAYBACK_FPS=5.0 can be used when running MOTE on video files to control the playback speed.
MOTE_OUTPUT_FORMAT=xml|objects enables prints of the generated scene. 'xml' will print the scenes in xml format while 'objects' will print the count of objects in the scene.
MOTE_STORE_XML=yes with MOTE_OUTPUT_FORMAT=xml set, will store each scene as an xml file.
MOTE_STATS=1 is used to print MOTE statistics.
MOTE_OUTPUT_IMAGES=all|objects|none controls creating images with scenes visualized in them. 'all' will create images for all analyzed frames, 'objects' only creates images when there are objects in the frame and 'none' will not create any images.
[*] Emulating binary ./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter -h and cpu configuration 24KEc
Usage:
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider [options]...
Note! Algorithm options will only have effect when running on non-camera sources. That is, they will only have effect when running in dev mode and when the source is either file:// or http://. When running on camera sources these parameters are automatically determined based on the camera properties.
Options are:
-l Log stream selection. Enable this option to use the stdio instead of
syslog. On host this is enabled by default.
-x <execution mode> Execution mode: dbus|dev|capture.
-s <source> Image source: source=<channel-id>|file://file://<filelt;file path>|http://http://<streamlt;stream path>.
-r <resolution> Resolution string, <width>x<height>. If omitted and running on
file original resolution is kept.
-c Enable colorspace ycbcr, default monochrome.
-f <fps> Frame rate scene output.
-b <bps> Burst rate (image input fps).
-m <fps_movie> Frame rate for movie file input. Note! Only used for files.
-t Use parameters optimized for thermal cameras.
-z Enable tracking during PTZ movement.
-v <verbosity> Verbosity level in range {-3:4}. Default 0.
-h Print this help
There are also some environment variables that can be used for development and debug purpose:
MOTE_PLAYBACK_FPS=5.0 can be used when running MOTE on video files to control the playback speed.
MOTE_OUTPUT_FORMAT=xml|objects enables prints of the generated scene. 'xml' will print the scenes in xml format while 'objects' will print the count of objects in the scene.
MOTE_STORE_XML=yes with MOTE_OUTPUT_FORMAT=xml set, will store each scene as an xml file.
MOTE_STATS=1 is used to print MOTE statistics.
MOTE_OUTPUT_IMAGES=all|objects|none controls creating images with scenes visualized in them. 'all' will create images for all analyzed frames, 'objects' only creates images when there are objects in the frame and 'none' will not create any images.
[*] Emulating binary ./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter -help and cpu configuration 24KEc
Usage:
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider [options]...
Note! Algorithm options will only have effect when running on non-camera sources. That is, they will only have effect when running in dev mode and when the source is either file:// or http://. When running on camera sources these parameters are automatically determined based on the camera properties.
Options are:
-l Log stream selection. Enable this option to use the stdio instead of
syslog. On host this is enabled by default.
-x <execution mode> Execution mode: dbus|dev|capture.
-s <source> Image source: source=<channel-id>|file://file://<filelt;file path>|http://http://<streamlt;stream path>.
-r <resolution> Resolution string, <width>x<height>. If omitted and running on
file original resolution is kept.
-c Enable colorspace ycbcr, default monochrome.
-f <fps> Frame rate scene output.
-b <bps> Burst rate (image input fps).
-m <fps_movie> Frame rate for movie file input. Note! Only used for files.
-t Use parameters optimized for thermal cameras.
-z Enable tracking during PTZ movement.
-v <verbosity> Verbosity level in range {-3:4}. Default 0.
-h Print this help
There are also some environment variables that can be used for development and debug purpose:
MOTE_PLAYBACK_FPS=5.0 can be used when running MOTE on video files to control the playback speed.
MOTE_OUTPUT_FORMAT=xml|objects enables prints of the generated scene. 'xml' will print the scenes in xml format while 'objects' will print the count of objects in the scene.
MOTE_STORE_XML=yes with MOTE_OUTPUT_FORMAT=xml set, will store each scene as an xml file.
MOTE_STATS=1 is used to print MOTE statistics.
MOTE_OUTPUT_IMAGES=all|objects|none controls creating images with scenes visualized in them. 'all' will create images for all analyzed frames, 'objects' only creates images when there are objects in the frame and 'none' will not create any images.
[*] Emulating binary ./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter --help and cpu configuration 24KEc
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider: invalid option -- '-'
Usage:
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider [options]...
Note! Algorithm options will only have effect when running on non-camera sources. That is, they will only have effect when running in dev mode and when the source is either file:// or http://. When running on camera sources these parameters are automatically determined based on the camera properties.
Options are:
-l Log stream selection. Enable this option to use the stdio instead of
syslog. On host this is enabled by default.
-x <execution mode> Execution mode: dbus|dev|capture.
-s <source> Image source: source=<channel-id>|file://file://<filelt;file path>|http://http://<streamlt;stream path>.
-r <resolution> Resolution string, <width>x<height>. If omitted and running on
file original resolution is kept.
-c Enable colorspace ycbcr, default monochrome.
-f <fps> Frame rate scene output.
-b <bps> Burst rate (image input fps).
-m <fps_movie> Frame rate for movie file input. Note! Only used for files.
-t Use parameters optimized for thermal cameras.
-z Enable tracking during PTZ movement.
-v <verbosity> Verbosity level in range {-3:4}. Default 0.
-h Print this help
There are also some environment variables that can be used for development and debug purpose:
MOTE_PLAYBACK_FPS=5.0 can be used when running MOTE on video files to control the playback speed.
MOTE_OUTPUT_FORMAT=xml|objects enables prints of the generated scene. 'xml' will print the scenes in xml format while 'objects' will print the count of objects in the scene.
MOTE_STORE_XML=yes with MOTE_OUTPUT_FORMAT=xml set, will store each scene as an xml file.
MOTE_STATS=1 is used to print MOTE statistics.
MOTE_OUTPUT_IMAGES=all|objects|none controls creating images with scenes visualized in them. 'all' will create images for all analyzed frames, 'objects' only creates images when there are objects in the frame and 'none' will not create any images.
[*] Emulating binary ./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter --version and cpu configuration 24KEc
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider: invalid option -- '-'
Usage:
./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider [options]...
Note! Algorithm options will only have effect when running on non-camera sources. That is, they will only have effect when running in dev mode and when the source is either file:// or http://. When running on camera sources these parameters are automatically determined based on the camera properties.
Options are:
-l Log stream selection. Enable this option to use the stdio instead of
syslog. On host this is enabled by default.
-x <execution mode> Execution mode: dbus|dev|capture.
-s <source> Image source: source=<channel-id>|file://file://<filelt;file path>|http://http://<streamlt;stream path>.
-r <resolution> Resolution string, <width>x<height>. If omitted and running on
file original resolution is kept.
-c Enable colorspace ycbcr, default monochrome.
-f <fps> Frame rate scene output.
-b <bps> Burst rate (image input fps).
-m <fps_movie> Frame rate for movie file input. Note! Only used for files.
-t Use parameters optimized for thermal cameras.
-z Enable tracking during PTZ movement.
-v <verbosity> Verbosity level in range {-3:4}. Default 0.
-h Print this help
There are also some environment variables that can be used for development and debug purpose:
MOTE_PLAYBACK_FPS=5.0 can be used when running MOTE on video files to control the playback speed.
MOTE_OUTPUT_FORMAT=xml|objects enables prints of the generated scene. 'xml' will print the scenes in xml format while 'objects' will print the count of objects in the scene.
MOTE_STORE_XML=yes with MOTE_OUTPUT_FORMAT=xml set, will store each scene as an xml file.
MOTE_STATS=1 is used to print MOTE statistics.
MOTE_OUTPUT_IMAGES=all|objects|none controls creating images with scenes visualized in them. 'all' will create images for all analyzed frames, 'objects' only creates images when there are objects in the frame and 'none' will not create any images.
[*] Emulating binary ./share/addon/packages/autostart/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider.opk.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider_r2.8.16_mips32r2el-nf.opk_extract/data.tar.gz_extract/gzip.uncompressed_extract/axis-video-scene-provider/usr/bin/video-scene-provider with parameter version and cpu configuration 24KEc
-----------------------------------------------------------------
