EMBA firmware report

-----------------------------------------------------------------

[*] Emulating binary name: pwmctrl

[*] Emulator used: qemu-mipsel-static

[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract (1/2)

[*] Using CPU config:

[*] Emulating binary: /usr/bin/pwmctrl

[*] Change permissions +x to /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract/./usr/bin/pwmctrl.

[*] Emulating binary ./usr/bin/pwmctrl with parameter NONE

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/bin/pwmctrl with parameter -v

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/bin/pwmctrl with parameter -V

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/bin/pwmctrl with parameter -h

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/bin/pwmctrl with parameter -help

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/bin/pwmctrl with parameter --help

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/bin/pwmctrl with parameter --version

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

[*] Emulating binary ./usr/bin/pwmctrl with parameter version

qemu: uncaught target signal 4 (Illegal instruction) - core dumped

-----------------------------------------------------------------

-----------------------------------------------------------------

[*] Emulating binary name: pwmctrl

[*] Emulator used: qemu-mipsel-static

[*] Using root directory: /logs/s115_usermode_emulator/firmware/unblob_extracted/firmware_extract/4325012-58052244.squashfs_v4_le_extract/usr (2/2)

[*] Using CPU config: 24KEc

[*] Emulating binary: /bin/pwmctrl

[*] Emulating binary ./bin/pwmctrl with parameter NONE and cpu configuration 24KEc

pin name doesn't contain a digit

[*] Emulating binary ./bin/pwmctrl with parameter -v and cpu configuration 24KEc

pin argument missing

[*] Emulating binary ./bin/pwmctrl with parameter -V and cpu configuration 24KEc

./bin/pwmctrl: invalid option -- 'V'

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

pin argument missing

[*] Emulating binary ./bin/pwmctrl with parameter -h and cpu configuration 24KEc

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

pin argument missing

[*] Emulating binary ./bin/pwmctrl with parameter -help and cpu configuration 24KEc

./bin/pwmctrl: invalid option -- 'e'

./bin/pwmctrl: invalid option -- 'l'

./bin/pwmctrl: invalid option -- 'p'

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

pin argument missing

[*] Emulating binary ./bin/pwmctrl with parameter --help and cpu configuration 24KEc

./bin/pwmctrl: invalid option -- '-'

./bin/pwmctrl: invalid option -- 'e'

./bin/pwmctrl: invalid option -- 'l'

./bin/pwmctrl: invalid option -- 'p'

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

pin argument missing

[*] Emulating binary ./bin/pwmctrl with parameter --version and cpu configuration 24KEc

./bin/pwmctrl: invalid option -- '-'

./bin/pwmctrl: invalid option -- 'e'

./bin/pwmctrl: invalid option -- 'r'

./bin/pwmctrl: invalid option -- 's'

./bin/pwmctrl: invalid option -- 'i'

./bin/pwmctrl: invalid option -- 'o'

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM./bin/pwmctrl: invalid option -- 'n'

_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

Usage:

	pwmctrl <port><pin>=<pwm><high-period>/<total-period>@<frequency>

	pwmctrl <port><pin>=<clk><frequency>

	pwmctrl <port><pin>=<ode><nbr0-4>

Send pwm to a pin. high-time/total-time makes up

the duty cycle. Minimum period is 1/2 and max is

8190/16380. For each period setting there is a set of

frequencies possible. Highest frequency is 50MHz and

lowest is 3053Hz

Example:

	pwmctrl c4 pwm1000/3000&commat000

	pwmctrl c4 clk600000

	pwmctrl c4 mode3

Modes:

	PWM_OFF = 0		Disabled, deallocated

	PWM_STANDARD = 1	390 kHz, duty cycle 0..255/256

	PWM_FAST = 2		Variable freq, w/ 10ns active pulse len

	PWM_VARFREQ = 3		Individually configurable high/low periods

	PWM_SOFT = 4		Software generated

pin argument missing

[*] Emulating binary ./bin/pwmctrl with parameter version and cpu configuration 24KEc

pin name doesn't contain a digit

-----------------------------------------------------------------