METRICS: Using configs from the Registry (like --config=p/ci) reports pseudonymous rule metrics to semgrep.dev.
To disable Registry rule metrics, use "--metrics=off".
Using configs only from local files (like --config=xyz.yml) does not enable metrics.
More information: https://semgrep.dev/docs/metrics
┌─────────────┐
│ Scan Status │
└─────────────┘
Scanning 5681 files tracked by git with 7 Code rules:
Scanning 73 files with 7 bash rules.
┌───────────────────┐
│ 885 Code Findings │
└───────────────────┘
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/et
c/qos/qos.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
101┆ set -- $CLASSES
⋮┆----------------------------------------
366┆ . $CONF_PATH || _error "Failed to source '$CONF_PATH'"
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/et
c/rtp/set_video_dscp.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
4┆ VALUE=$(grep VideoDSCP $CONF_FILE | grep -E -o '[0-9]+')
⋮┆----------------------------------------
6┆ dbus-send --system --print-reply --type=method_call --dest=com.axis.Streamer /com/axis/Streamer/Video
org.freedesktop.DBus.Properties.Set string:com.axis.Stream ...
[shortened a long line from output, adjust with --max-chars-per-line]
⋮┆----------------------------------------
8┆ dbus-send --system --print-reply --type=method_call --dest=com.axis.JpegStreamer1
/com/axis/JpegStreamer1/Conf org.freedesktop.DBus.Properties.Set string:com.ax ...
[shortened a long line from output, adjust with --max-chars-per-line]
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/a1210_iconf.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
17┆ linked=$(cat $LINK_FILE)
⋮┆----------------------------------------
26┆ trattcom -p RELAY_ICONF_0 -v $iconf0
⋮┆----------------------------------------
27┆ trattcom -p RELAY_ICONF_1 -v $iconf1
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/a1601_test.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
53┆ val=$(cat $port/value)
⋮┆----------------------------------------
58┆ x=$(($x+1))
⋮┆----------------------------------------
71┆ echo $VALUE > $RELAY_1/value
⋮┆----------------------------------------
72┆ echo $VALUE > $RELAY_2/value
⋮┆----------------------------------------
74┆ check_port_value $AUX_IO1 $INVERTED_VALUE
⋮┆----------------------------------------
75┆ check_port_value $AUX_IO2 $VALUE
⋮┆----------------------------------------
76┆ check_port_value $AUX_IO3 $INVERTED_VALUE
⋮┆----------------------------------------
77┆ check_port_value $AUX_IO4 $VALUE
⋮┆----------------------------------------
84┆ COUNT=$(($COUNT+1))
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/check_reader_1.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
17┆ $TRATT_COMMAND $PORT -p RS485_1_CTRL1
⋮┆----------------------------------------
20┆ $TRATT_COMMAND $PORT -p RS485_1_CTRL2
⋮┆----------------------------------------
23┆ $TRATT_COMMAND $PORT -p RS485_1_PU/PD
⋮┆----------------------------------------
26┆ $TRATT_COMMAND $PORT -p RS485_1_TERM
⋮┆----------------------------------------
29┆ $TRATT_COMMAND $PORT -p RS485_1_RTS
⋮┆----------------------------------------
32┆ $TRATT_COMMAND $PORT -p RS485_1_WIEGAND_ON
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/check_reader_2.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
17┆ $TRATT_COMMAND $PORT -p RS485_2_CTRL1
⋮┆----------------------------------------
20┆ $TRATT_COMMAND $PORT -p RS485_2_CTRL2
⋮┆----------------------------------------
23┆ $TRATT_COMMAND $PORT -p RS485_2_PU/PD
⋮┆----------------------------------------
26┆ $TRATT_COMMAND $PORT -p RS485_2_TERM
⋮┆----------------------------------------
29┆ $TRATT_COMMAND $PORT -p RS485_2_RTS
⋮┆----------------------------------------
32┆ $TRATT_COMMAND $PORT -p RS485_2_WIEGAND_ON
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/checkprogress.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
15┆ $(init_done)
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/data-partition.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
14┆ mkdir -p $mp ||
⋮┆----------------------------------------
16┆ mount -t ubifs ubi2:data_volume $mp ||
⋮┆----------------------------------------
22┆ mkdir $mp/packages
⋮┆----------------------------------------
23┆ ln -s $mp/packages /usr/local/packages
⋮┆----------------------------------------
28┆ mv /var/lib/docker $mp/docker
⋮┆----------------------------------------
30┆ mkdir $mp/docker
⋮┆----------------------------------------
32┆ ln -s $mp/docker /var/lib/docker
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/elflibcheck.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
8┆ echo $((1+${#t}))
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
4┆ local t=`dd if=$1 bs=1 count=1 skip=$2 2>/dev/null`
⋮┆----------------------------------------
8┆ echo $((1+${#t}))
⋮┆----------------------------------------
12┆ local elfmag0=`getb $1 0`
⋮┆----------------------------------------
13┆ local elfmag1_3=`dd if=$1 bs=1 count=3 skip=1 2>/dev/null`
⋮┆----------------------------------------
14┆ local e_type0=`getb $1 16`
⋮┆----------------------------------------
15┆ local e_type1=`getb $1 17`
⋮┆----------------------------------------
16┆ local e_machine0=`getb $1 18`
⋮┆----------------------------------------
17┆ local e_machine1=`getb $1 19`
⋮┆----------------------------------------
19┆ local ei_data=`getb $1 5`
⋮┆----------------------------------------
20┆ local e_flags0=`getb $1 36`
⋮┆----------------------------------------
21┆ local e_flags1=`getb $1 37`
⋮┆----------------------------------------
22┆ local e_flags2=`getb $1 38`
⋮┆----------------------------------------
23┆ local e_flags3=`getb $1 39`
⋮┆----------------------------------------
235┆ ldd -s $file || {
⋮┆----------------------------------------
237┆ filestr=`emstr $file`
⋮┆----------------------------------------
244┆ exit $result
⋮┆----------------------------------------
247┆ ldd $file
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/factory-default-data-partition.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
10┆ umount $mp || error "Failed to unmount $mp"
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/function_button.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
8┆ $LOGIT -p err -- $*
⋮┆----------------------------------------
16┆ $GDBUS_CALL.assistant_is_active 2>/dev/null
⋮┆----------------------------------------
29┆ focus_active=$($GDBUS_CALL.assistant_is_active) ||
⋮┆----------------------------------------
36┆ $GDBUS_CALL.assistant_button ||
⋮┆----------------------------------------
60┆ $GDBUS_CALL.assistant_button ||
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/iowrapper.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
47┆ check_port $2
⋮┆----------------------------------------
48┆ check_state $3
⋮┆----------------------------------------
51┆ check_duration $4
⋮┆----------------------------------------
67┆ port=$(($2 + 1))
⋮┆----------------------------------------
83┆ $cmd
⋮┆----------------------------------------
101┆ $cmd
⋮┆----------------------------------------
130┆ $cmd "$args"
⋮┆----------------------------------------
149┆ $cmd "$args"
⋮┆----------------------------------------
158┆ port=$(($1 + 1))
⋮┆----------------------------------------
171┆ $cmd
⋮┆----------------------------------------
190┆ $cmd "$args"
⋮┆----------------------------------------
196┆ validate $*
⋮┆----------------------------------------
201┆ start_io2d $*
⋮┆----------------------------------------
203┆ start $*
⋮┆----------------------------------------
209┆ stop_io2d $*
⋮┆----------------------------------------
211┆ stop $*
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/ledsonoff.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
15┆ kill $pid
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/mcu_uptime.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
17┆ $TRATT_COMMAND $PORT -u
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/poe_status.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
225┆ printf " -Software Power Requested: %d.%d Watt\n" $(($requested/10))
$(($requested%10))
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
27┆ value=$($GDBUS_POWERD_PROP_GET $2 2>&1) ||
⋮┆----------------------------------------
36┆ eval $1=\$value
⋮┆----------------------------------------
61┆ poe_class=$(($2 & 0x0F))
⋮┆----------------------------------------
64┆ poe_class=$(($2 & 0x0F))
⋮┆----------------------------------------
166┆ info=$($GDBUS_GLLDPD_METHOD.GetNeighbourInfo 2>&1) ||
⋮┆----------------------------------------
215┆ info=$($GDBUS_GLLDPD_METHOD.GetPoeInfo 2>&1) ||
⋮┆----------------------------------------
225┆ printf " -Software Power Requested: %d.%d Watt\n" $(($requested/10))
$(($requested%10))
⋮┆----------------------------------------
225┆ printf " -Software Power Requested: %d.%d Watt\n" $(($requested/10))
$(($requested%10))
⋮┆----------------------------------------
232┆ print_prio_string $prio
⋮┆----------------------------------------
253┆ info=$($GDBUS_POWERD_METHOD.TotalPowerConsumption 2>&1) || {
⋮┆----------------------------------------
268┆ set -- $info
⋮┆----------------------------------------
274┆ current_power=$(printf "%.1f" $current_power)
⋮┆----------------------------------------
277┆ min_power=$(printf "%.1f" $2)
⋮┆----------------------------------------
280┆ max_power=$(printf "%.1f" $3)
⋮┆----------------------------------------
285┆ average_power=$(printf "%.1f" $average_power)
⋮┆----------------------------------------
329┆ info=$($GDBUS_POWERD_METHOD.DevicePower $1 2>&1) ||
⋮┆----------------------------------------
335┆ set -- $info
⋮┆----------------------------------------
344┆ current_power=$(printf "%.1f" $2)
⋮┆----------------------------------------
347┆ min_power=$(printf "%.1f" $3)
⋮┆----------------------------------------
350┆ max_power=$(printf "%.1f" $4)
⋮┆----------------------------------------
355┆ average_power=$(printf "%.1f" $average_power)
⋮┆----------------------------------------
359┆ print_pretty_name $name
⋮┆----------------------------------------
370┆ info=$($GDBUS_POWERSAVE_METHOD.GetPowerSavingSupport 2>&1) ||
⋮┆----------------------------------------
379┆ info=$($GDBUS_POWERSAVE_METHOD.GetPowerSavingMode 2>&1) ||
⋮┆----------------------------------------
402┆ print_poeclass_string "Hardware:" $return_value
⋮┆----------------------------------------
406┆ print_poeclass_string "Software:" $return_value
⋮┆----------------------------------------
411┆ lldp_info=$($GDBUS_POLICYKIT_LLDPCLI show-neighbors 2>&1) ||
⋮┆----------------------------------------
419┆ print_power_status $return_value
⋮┆----------------------------------------
423┆ printf "Power Requested: %.1f Watt\n" $return_value
⋮┆----------------------------------------
427┆ printf "Power Received: %.1f Watt\n" $return_value
⋮┆----------------------------------------
441┆ print_external_power_string $return_value
⋮┆----------------------------------------
446┆ print_power_status $return_value
⋮┆----------------------------------------
450┆ printf "Power Requested: %.1f Watt\n" $return_value
⋮┆----------------------------------------
454┆ printf "Power Received: %.1f Watt\n" $return_value
⋮┆----------------------------------------
473┆ print_device_power_consumption $device_index
⋮┆----------------------------------------
475┆ device_index=$(($device_index + 1))
⋮┆----------------------------------------
529┆ poe_output=$($poet_executable --info 2>&1 || :)
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
267┆ local IFS=,
⋮┆----------------------------------------
334┆ local IFS=,
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/print_a1210_inputs.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
14┆ tmp=`cat $GP/door_input_1/value`
⋮┆----------------------------------------
15┆ tmp2=`cat $ADC/in_voltage_DOOR_ADC_1_raw`
⋮┆----------------------------------------
18┆ tmp=`cat $GP/door_input_2/value`
⋮┆----------------------------------------
19┆ tmp2=`cat $ADC/in_voltage_DOOR_ADC_2_raw`
⋮┆----------------------------------------
22┆ tmp=`cat $GP/ext_input_1/value`
⋮┆----------------------------------------
23┆ tmp2=`cat $ADC/in_voltage_EXT_ADC_1_raw`
⋮┆----------------------------------------
26┆ tmp=`cat $GP/ext_input_2/value`
⋮┆----------------------------------------
27┆ tmp2=`cat $ADC/in_voltage_EXT_ADC_2_raw`
⋮┆----------------------------------------
30┆ tmp=`cat $GP/reader_input/value`
⋮┆----------------------------------------
31┆ tmp2=`cat $ADC/in_voltage_READER_ADC_raw`
⋮┆----------------------------------------
34┆ tmp=`cat $GP/sup_digin_aux_io_1/value`
⋮┆----------------------------------------
35┆ tmp2=`cat $ADC/in_voltage_SUP_ADC_AUX_IO_1_raw`
⋮┆----------------------------------------
38┆ tmp=`cat $GP/sup_digin_aux_io_2/value`
⋮┆----------------------------------------
39┆ tmp2=`cat $ADC/in_voltage_SUP_ADC_AUX_IO_2_raw`
⋮┆----------------------------------------
42┆ tmp=`cat $GP/aux_io_load_fault/value`
⋮┆----------------------------------------
45┆ tmp=`cat $GP/reader_load_fault/value`
⋮┆----------------------------------------
48┆ tmp=`cat $ADC/in_voltage_READER_IMON_raw`
⋮┆----------------------------------------
51┆ tmp=`cat $ADC/in_voltage_RELAY_IMON_raw`
⋮┆----------------------------------------
54┆ tmp=`cat $GP/dc_available/value`
⋮┆----------------------------------------
57┆ tmp=`cat $ADC/in_voltage_DC_IMON_raw`
⋮┆----------------------------------------
60┆ tmp=`cat $GP/relay_12v_sel/value`
⋮┆----------------------------------------
63┆ tmp=`cat $GP/relay_24v_sel/value`
⋮┆----------------------------------------
66┆ tmp=`cat $GP/tampering/value`
⋮┆----------------------------------------
69┆ tmp=`cat $GP/poe_af/value`
⋮┆----------------------------------------
76┆ tmp=`$TCMD -p DOOR_INPUT_1`
⋮┆----------------------------------------
77┆ tmp2=`$TCMD -p DOOR_ADC_1`
⋮┆----------------------------------------
80┆ tmp=`$TCMD -p DOOR_INPUT_2`
⋮┆----------------------------------------
81┆ tmp2=`$TCMD -p DOOR_ADC_2`
⋮┆----------------------------------------
84┆ tmp=`$TCMD -p EXT_INPUT_1`
⋮┆----------------------------------------
85┆ tmp2=`$TCMD -p EXT_ADC_1`
⋮┆----------------------------------------
88┆ tmp=`$TCMD -p EXT_INPUT_2`
⋮┆----------------------------------------
89┆ tmp2=`$TCMD -p EXT_ADC_2`
⋮┆----------------------------------------
92┆ tmp=`$TCMD -p READER_INPUT`
⋮┆----------------------------------------
93┆ tmp2=`$TCMD -p READER_ADC`
⋮┆----------------------------------------
96┆ tmp=`$TCMD -p SUP_DIGIN_AUX_IO_1`
⋮┆----------------------------------------
97┆ tmp2=`$TCMD -p SUP_ADC_AUX_IO_1`
⋮┆----------------------------------------
100┆ tmp=`$TCMD -p SUP_DIGIN_AUX_IO_2`
⋮┆----------------------------------------
101┆ tmp2=`$TCMD -p SUP_ADC_AUX_IO_2`
⋮┆----------------------------------------
104┆ tmp=`$TCMD -p AUX_IO_LOAD_FAULT`
⋮┆----------------------------------------
107┆ tmp=`$TCMD -p READER_LOAD_FAULT`
⋮┆----------------------------------------
110┆ tmp=`$TCMD -p READER_IMON`
⋮┆----------------------------------------
113┆ tmp=`$TCMD -p RELAY_IMON`
⋮┆----------------------------------------
116┆ tmp=`$TCMD -p DC_AVAILABLE`
⋮┆----------------------------------------
119┆ tmp=`$TCMD -p DC_IMON`
⋮┆----------------------------------------
122┆ tmp=`$TCMD -p RELAY_12V_SEL`
⋮┆----------------------------------------
125┆ tmp=`$TCMD -p RELAY_24V_SEL`
⋮┆----------------------------------------
128┆ tmp=`$TCMD -p TAMPERING`
⋮┆----------------------------------------
131┆ tmp=`$TCMD -p POE_AF`
⋮┆----------------------------------------
134┆ tmp=`$TCMD -p PGOOD_24V`
⋮┆----------------------------------------
137┆ tmp=`$TCMD -p POE_AVAILABLE`
⋮┆----------------------------------------
148┆ linked=$(cat $LINK_FILE)
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/reader_1_rs485.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
16┆ $TRATT_COMMAND $PORT -p RS485_1_CTRL1 -v 0
⋮┆----------------------------------------
17┆ $TRATT_COMMAND $PORT -p RS485_1_CTRL2 -v 1
⋮┆----------------------------------------
18┆ $TRATT_COMMAND $PORT -p RS485_1_PU/PD -v 0
⋮┆----------------------------------------
19┆ $TRATT_COMMAND $PORT -p RS485_1_TERM -v 1
⋮┆----------------------------------------
20┆ $TRATT_COMMAND $PORT -p RS485_1_WIEGAND_ON -v 1
⋮┆----------------------------------------
21┆ $TRATT_COMMAND $PORT -Q
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/reader_1_wiegand.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
16┆ $TRATT_COMMAND $PORT -p RS485_1_CTRL1 -v 1
⋮┆----------------------------------------
17┆ $TRATT_COMMAND $PORT -p RS485_1_CTRL2 -v 0
⋮┆----------------------------------------
18┆ $TRATT_COMMAND $PORT -p RS485_1_PU/PD -v 1
⋮┆----------------------------------------
19┆ $TRATT_COMMAND $PORT -p RS485_1_TERM -v 0
⋮┆----------------------------------------
20┆ $TRATT_COMMAND $PORT -p RS485_1_RTS -v 1
⋮┆----------------------------------------
21┆ $TRATT_COMMAND $PORT -p RS485_1_WIEGAND_ON -v 0
⋮┆----------------------------------------
22┆ $TRATT_COMMAND $PORT -q
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/reader_2_rs485.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
16┆ $TRATT_COMMAND $PORT -p RS485_2_CTRL1 -v 0
⋮┆----------------------------------------
17┆ $TRATT_COMMAND $PORT -p RS485_2_CTRL2 -v 1
⋮┆----------------------------------------
18┆ $TRATT_COMMAND $PORT -p RS485_2_PU/PD -v 0
⋮┆----------------------------------------
19┆ $TRATT_COMMAND $PORT -p RS485_2_TERM -v 1
⋮┆----------------------------------------
20┆ $TRATT_COMMAND $PORT -p RS485_2_WIEGAND_ON -v 1
⋮┆----------------------------------------
21┆ $TRATT_COMMAND $PORT -W
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/reader_2_wiegand.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
16┆ $TRATT_COMMAND $PORT -p RS485_2_CTRL1 -v 1
⋮┆----------------------------------------
17┆ $TRATT_COMMAND $PORT -p RS485_2_CTRL2 -v 0
⋮┆----------------------------------------
18┆ $TRATT_COMMAND $PORT -p RS485_2_PU/PD -v 1
⋮┆----------------------------------------
19┆ $TRATT_COMMAND $PORT -p RS485_2_TERM -v 0
⋮┆----------------------------------------
20┆ $TRATT_COMMAND $PORT -p RS485_2_RTS -v 1
⋮┆----------------------------------------
21┆ $TRATT_COMMAND $PORT -p RS485_2_WIEGAND_ON -v 0
⋮┆----------------------------------------
22┆ $TRATT_COMMAND $PORT -w
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/reset_mcu.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
20┆ set_gpio io_mcu_rst $LOW
⋮┆----------------------------------------
22┆ set_gpio io_mcu_rst $HIGH
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/set_wdr.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
9┆ wdr=$(busctl get-property $img_foo /com/axis/ImageControl/0/0 \
10┆ $img_interface
$wdr_prop) || {
⋮┆----------------------------------------
11┆ $logit "Could not get property: $wdr_prop from $img_interface";
⋮┆----------------------------------------
20┆ parhandclient set $param $1 ||
⋮┆----------------------------------------
21┆ $logit "Could not set $param to $1"
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/start-package-allowed.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
23┆ MAXRUNNING=$(($MAXRUNNING + 1))
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/validate_parameters.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
27┆ echo $1 | grep "^[^0-9]*$" || ! ( [ $1 -lt 0 ] || [ $1 -gt 63 ] )
⋮┆----------------------------------------
51┆ ! ( [ -z $user ] || [ -z $host ] || ! validate_host $host) ||
⋮┆----------------------------------------
96┆ validate_host $OPTARG
⋮┆----------------------------------------
99┆ validate_url $OPTARG
⋮┆----------------------------------------
102┆ validate_port $OPTARG
⋮┆----------------------------------------
105┆ validate_qos $OPTARG
⋮┆----------------------------------------
108┆ validate_email $OPTARG
⋮┆----------------------------------------
111┆ validate_wdr $OPTARG
⋮┆----------------------------------------
114┆ validate_defog $OPTARG
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
44┆ IFS="$IFS,;"
⋮┆----------------------------------------
54┆ IFS=$old_IFS
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/bin/vmstatus.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
63┆ printf "%lu\t%lu\t%lu\t%lu\t%lu\t%lu\t%lu\t%lu\t%lu\t%d\t%s\n" \
64┆ $Rss $Pss $Pss_Dirty $Shared_Clean $Shared_Dirty $Private_Clean $Private_Dirty $Swap $SwapPss $1
$comm
⋮┆----------------------------------------
69┆ TOTAL_PSS=$(($TOTAL_PSS + $Pss + $SwapPss))
⋮┆----------------------------------------
82┆ vmstatus $p
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/html/axis-cgi/lib/acap_handle_files.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
23┆ [ -d $2 ] && rm -rf $2 2>&1
⋮┆----------------------------------------
25┆ rm -rf $tmpdir 2>&1
⋮┆----------------------------------------
27┆ res=$(mkdir $tmpdir 2>&1) || {
⋮┆----------------------------------------
32┆ res=$(cp -fa $1/. $tmpdir) || {
⋮┆----------------------------------------
34┆ rm -rf $tmpdir 2>&1
⋮┆----------------------------------------
41┆ rm -rf $tmpdir 2>&1
⋮┆----------------------------------------
45┆ res=$(mv $tmpdir $2) || {
⋮┆----------------------------------------
47┆ rm -rf $tmpdir 2>&1
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/html/axis-cgi/lib/adp.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
428┆ res=$(eval $(__rootpath) $INSTALLER preupgrade \
429┆ $tmp_ld/$PREUPGRADESCRIPT 2>&1) || warning
"$res"
⋮┆----------------------------------------
437┆ res=$(eval $(__rootpath) $INSTALLER uninstall) || warning "$res"
⋮┆----------------------------------------
467┆ eval $(__rootpath) $INSTALLER install $limited_postinstall >$instlog.tmp 2>&1 || ret=$?
⋮┆----------------------------------------
768┆ eval $(__rootpath) $INSTALLER uninstall >/dev/null || {
⋮┆----------------------------------------
925┆ if eval $(__rootpath) start-package-allowed.sh $packdir/$APPNAME $APPTYPE >/dev/null; then
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
14┆ logger -t ${0##*/} -p INFO -- "$*"
⋮┆----------------------------------------
18┆ logger -t ${0##*/} -p WARNING -- "$*"
⋮┆----------------------------------------
22┆ logger -t ${0##*/} -p CRIT -- "$*"
⋮┆----------------------------------------
69┆ exit $exit_status
⋮┆----------------------------------------
82┆ exit $exit_status
⋮┆----------------------------------------
149┆ arch=$($PHC get properties.System.Architecture 2>&1) || {
⋮┆----------------------------------------
153┆ eval arch=$arch
⋮┆----------------------------------------
175┆ return $retval
⋮┆----------------------------------------
185┆ eval enb=$val
⋮┆----------------------------------------
192┆ eval $2=\$enb
⋮┆----------------------------------------
204┆ state=$(systemctl is-active $service 2>/dev/null) ||:
⋮┆----------------------------------------
209┆ systemctl --quiet stop $service >/dev/null 2>&1 || warning "Failed to stop $service"
⋮┆----------------------------------------
210┆ systemctl --quiet disable $service >/dev/null 2>&1 || warning "Failed to disable $service"
⋮┆----------------------------------------
215┆ systemctl --quiet enable $service >/dev/null 2>&1 || warning "Failed to enable $service"
⋮┆----------------------------------------
218┆ systemctl --quiet disable $service >/dev/null 2>&1 || warning "Failed to disable $service"
⋮┆----------------------------------------
220┆ systemctl --quiet restart $service >/dev/null 2>&1 || warning "Failed to restart $service"
⋮┆----------------------------------------
228┆ fsynced_write_or_cleanup $PACKAGE_DIRECTORY/$2/conf/$runstate_conf.tmp
$PACKAGE_DIRECTORY/$2/conf/$runstate_conf
⋮┆----------------------------------------
253┆ tmp_file=$(file_upload -S $CONTENT_LENGTH -n 204800 \
254┆ --allowed-realms=$realms --allowed-dirs=$dirs 2>&1)
|| {
⋮┆----------------------------------------
266┆ [ $CLEANUP -eq 0 ] || rm -f $tmp_file
⋮┆----------------------------------------
278┆ eval $1=\$tmp_file_general
⋮┆----------------------------------------
301┆ __pkgconf_get_var $tmp_package APPNAME || :
⋮┆----------------------------------------
302┆ __pkgconf_get_var $tmp_package REQEMBDEVVERSION || :
⋮┆----------------------------------------
304┆ embdevversion=$($PHC get properties.EmbeddedDevelopment.Version 2>&1) || {
⋮┆----------------------------------------
310┆ compare_vers $REQEMBDEVVERSION le $embdevversion || {
⋮┆----------------------------------------
321┆ res=$(tar -xzf $tmp_package -C $tmp_ld 2>&1) || {
⋮┆----------------------------------------
323┆ res2=$(tar -xf $tmp_package -C $tmp_ld 2>&1) || {
⋮┆----------------------------------------
325┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
331┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
336┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
343┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
348┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
353┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
358┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
368┆ mv /tmp/$APPNAME.xml $tmp_ld/$APPNAME.xml
⋮┆----------------------------------------
372┆ __is_supported_apptype $APPTYPE || {
⋮┆----------------------------------------
373┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
376┆ res=$($ELFCHECK $tmp_ld/$APPNAME 2>&1) || {
⋮┆----------------------------------------
377┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
386┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
392┆ res=$(mkdir $PACKAGE_DIRECTORY 2>&1) || {
⋮┆----------------------------------------
394┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
397┆ res=$(chmod 775 $PACKAGE_DIRECTORY 2>&1) || {
⋮┆----------------------------------------
399┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
411┆ _tmpbakdir=$(mktemp -d /tmp/$APPNAME.XXXXXX 2>&1) || {
⋮┆----------------------------------------
416┆ [ -z "$_tmpbakdir" ] || __preserve_app_runstate $dest_dir $_tmpbakdir
⋮┆----------------------------------------
423┆ preupgrade_res=$(chmod 755 $tmp_ld 2>&1) ||
⋮┆----------------------------------------
427┆ cd $dest_dir
⋮┆----------------------------------------
428┆ res=$(eval $(__rootpath) $INSTALLER preupgrade \
429┆ $tmp_ld/$PREUPGRADESCRIPT 2>&1) || warning
"$res"
⋮┆----------------------------------------
430┆ cd $oldpwd || :
⋮┆----------------------------------------
434┆ [ ! $_tmpbakdir ] || __preserve_app_conf $dest_dir $_tmpbakdir
⋮┆----------------------------------------
436┆ cd $dest_dir
⋮┆----------------------------------------
437┆ res=$(eval $(__rootpath) $INSTALLER uninstall) || warning "$res"
⋮┆----------------------------------------
439┆ cd $oldpwd || :
⋮┆----------------------------------------
440┆ rm -rf $dest_dir
⋮┆----------------------------------------
444┆ if ! __fsynced_write_or_cleanup_dir $tmp_ld $dest_dir; then
⋮┆----------------------------------------
446┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld $dest_dir $_tmpbakdir
⋮┆----------------------------------------
450┆ res=$(chmod 775 $dest_dir 2>&1) || {
⋮┆----------------------------------------
452┆ [ $CLEANUP -eq 0 ] || rm -fr $dest_dir $_tmpbakdir
⋮┆----------------------------------------
456┆ if ! __fsynced_write_or_cleanup_dir $_tmpbakdir $dest_dir/$BAKDIR; then
⋮┆----------------------------------------
461┆ rm -fr $tmp_ld $_tmpbakdir
⋮┆----------------------------------------
465┆ cd $dest_dir
⋮┆----------------------------------------
467┆ eval $(__rootpath) $INSTALLER install $limited_postinstall >$instlog.tmp 2>&1 || ret=$?
⋮┆----------------------------------------
468┆ fsynced_write_or_cleanup $instlog.tmp $instlog
⋮┆----------------------------------------
470┆ cd $oldpwd
⋮┆----------------------------------------
474┆ __logfile2error $instlog
⋮┆----------------------------------------
475┆ [ $CLEANUP -eq 0 ] || rm -fr $dest_dir
⋮┆----------------------------------------
483┆ __read_runstate $dest_dir/conf/runstate.conf _started
⋮┆----------------------------------------
485┆ __set_runstate start $APPNAME $STARTMODE ||
⋮┆----------------------------------------
503┆ __install_eap_file $eap_file reload_web
⋮┆----------------------------------------
506┆ [ "$result_code" -eq 0 ] || exit $result_code
⋮┆----------------------------------------
510┆ echo $APPNAME
⋮┆----------------------------------------
533┆ resstr=$(cp $keyfile $packdir/$LICFILENAME 2>&1) || {
⋮┆----------------------------------------
565┆ ... echo $licensekey | sed -rn
's/.*<ApplicationID>([[:digit:]]*)<\/ApplicationID>.*<MinimumMajorVersion>([-[:digit:]]*)<\/MinimumMajorVersion>.*<Min
imumMinorVersio ...
[shortened a long line from output, adjust with --max-chars-per-line]
⋮┆----------------------------------------
571┆ eval $expression || :
⋮┆----------------------------------------
614┆ serialnumber=$($PHC get \
615┆ properties.system.serialnumber -
RAW |
⋮┆----------------------------------------
617┆ deviceid=$(echo $deviceid |tr '[:lower:]' '[:upper:]')
⋮┆----------------------------------------
624┆ date -d $expirationdate -D%F +%s)
⋮┆----------------------------------------
650┆ __validate_license_key $keyfile
⋮┆----------------------------------------
652┆ [ $result_code -eq 0 ] || exit $result_code
⋮┆----------------------------------------
654┆ __install_license_key $pack $keyfile
⋮┆----------------------------------------
656┆ [ $result_code -eq 0 ] || exit $result_code
⋮┆----------------------------------------
674┆ resstr=$(rm $1 2>&1) || {
⋮┆----------------------------------------
687┆ __error 10 $pack
⋮┆----------------------------------------
696┆ __error 24 $pack
⋮┆----------------------------------------
700┆ __error 24 $pack
⋮┆----------------------------------------
704┆ [ $CLEANUP -eq 0 ] || rm -fr $tmp_ld
⋮┆----------------------------------------
705┆ __error 24 $pack
⋮┆----------------------------------------
707┆ tmp_file=$(file_upload -S $CONTENT_LENGTH -n 204800 \
708┆ --allowed-realms=$realms --allowed-dirs=$dirs 2>&1) ||
ret=$?
⋮┆----------------------------------------
711┆ __error 22 $pack
⋮┆----------------------------------------
715┆ __error 22 $pack
⋮┆----------------------------------------
718┆ rm -f $uploadfile
⋮┆----------------------------------------
721┆ __error 22 $pack
⋮┆----------------------------------------
725┆ error cannot mv $tmp_file $uploadfile
⋮┆----------------------------------------
726┆ __error 22 $pack
⋮┆----------------------------------------
728┆ chmod 644 $uploadfile || {
⋮┆----------------------------------------
730┆ __error 22 $pack
⋮┆----------------------------------------
734┆ __validate_license_key $uploadfile
⋮┆----------------------------------------
737┆ [ $result_code -ne 21 ] || rm -f $uploadfile
⋮┆----------------------------------------
738┆ __error "$result_code" $pack
⋮┆----------------------------------------
758┆ pid=$(__lua_application_is_running $xmlfile)
⋮┆----------------------------------------
760┆ pid=$(pidof $APPNAME) || :
⋮┆----------------------------------------
763┆ __set_runstate stop $APPNAME $STARTMODE || {
⋮┆----------------------------------------
767┆ cd $packdir
⋮┆----------------------------------------
768┆ eval $(__rootpath) $INSTALLER uninstall >/dev/null || {
⋮┆----------------------------------------
777┆ rm -f $APACHE_VHOSTS_ALL/urls_$APPNAME.conf
⋮┆----------------------------------------
778┆ rm -f $APACHE_VHOSTS_ALL/urls_$APPNAME.conf.tmp
⋮┆----------------------------------------
799┆ resstring=$(rm $packdir/$LICFILENAME 2>&1) || {
⋮┆----------------------------------------
826┆ cat $packdir/$LICFILENAME
⋮┆----------------------------------------
883┆ pid=$(__lua_application_is_running $xmlfile)
⋮┆----------------------------------------
885┆ pid=$(pidof $APPNAME) || :
⋮┆----------------------------------------
925┆ if eval $(__rootpath) start-package-allowed.sh $packdir/$APPNAME $APPTYPE >/dev/null; then
⋮┆----------------------------------------
926┆ __set_runstate start $APPNAME $STARTMODE ||
⋮┆----------------------------------------
944┆ __set_runstate stop $APPNAME $STARTMODE || :
⋮┆----------------------------------------
946┆ pid=$(__lua_application_is_running $xmlfile)
⋮┆----------------------------------------
948┆ pid=$(pidof $APPNAME) || :
⋮┆----------------------------------------
965┆ [ $err -eq 0 ] || exit $err
⋮┆----------------------------------------
984┆ __error 29 $pack
⋮┆----------------------------------------
988┆ __error 29 $pack
⋮┆----------------------------------------
992┆ __error 29 $pack
⋮┆----------------------------------------
1011┆ __error 27 $pack
⋮┆----------------------------------------
1014┆ response_code=$(echo $response |
⋮┆----------------------------------------
1020┆ __error 28 $pack
⋮┆----------------------------------------
1023┆ mkdir -p $LICDIR || {
⋮┆----------------------------------------
1025┆ __error 22 $pack
⋮┆----------------------------------------
1027┆ chmod 700 $LICDIR || {
⋮┆----------------------------------------
1029┆ __error 22 $pack
⋮┆----------------------------------------
1032┆ if ! touch $LICFILEPATH >/dev/null; then
⋮┆----------------------------------------
1034┆ __error 28 $pack
⋮┆----------------------------------------
1039┆ rm -f $LICFILEPATH.data $LICFILEPATH.raw
⋮┆----------------------------------------
1041┆ [ -z "$within_xml" ] || echo $line >>$LICFILEPATH
⋮┆----------------------------------------
1042┆ echo $line >>$LICFILEPATH.raw
⋮┆----------------------------------------
1043┆ echo $line >>$LICFILEPATH.data
⋮┆----------------------------------------
1045┆ echo $line >$LICFILEPATH
⋮┆----------------------------------------
1057┆ content=$(cat $LICFILEPATH.data || :)
⋮┆----------------------------------------
1060┆ __error 28 $pack
⋮┆----------------------------------------
1072┆ __error $err $pack
⋮┆----------------------------------------
1075┆ chmod 644 $LICFILEPATH || {
⋮┆----------------------------------------
1077┆ __error 28 $pack
⋮┆----------------------------------------
1080┆ __install_license_key $pack $LICFILEPATH
⋮┆----------------------------------------
1082┆ rm -f $LICFILEPATH
⋮┆----------------------------------------
1083┆ [ $result_code -eq 0 ] || __error "$result_code" $pack
⋮┆----------------------------------------
1085┆ __send_action_resp $action "" $pack
⋮┆----------------------------------------
1141┆ dbus_resp=$($DBUS_REQ_GET_APP_STATUS string:$PACKAGE_DIRECTORY/${APPNAME%.*}/$APPNAME 2>/dev/null)
⋮┆----------------------------------------
1162┆ eval $1=\$app_status
⋮┆----------------------------------------
1181┆ exit $res
⋮┆----------------------------------------
1192┆ licstatus=$(licensekey_cli -a $APPNAME -i $APPID -m $APPMAJORVERSION -n $APPMINORVERSION) || {
⋮┆----------------------------------------
1209┆ eval $2=\$licstatus
⋮┆----------------------------------------
1210┆ eval $3=\$licdate
⋮┆----------------------------------------
1220┆ __licinfo_from_file $license_file lic_status lic_date || return 1
⋮┆----------------------------------------
1224┆ lic_status=$($PACKAGE_DIRECTORY/$APPNAME/$APPNAME $LICENSE_CHECK_ARGS)
⋮┆----------------------------------------
1234┆ __licinfo_from_file $license_file lic_status lic_date || return 1
⋮┆----------------------------------------
1238┆ eval $2=\$lic_status
⋮┆----------------------------------------
1239┆ eval $3=\$lic_date
⋮┆----------------------------------------
1258┆ eval $2=\$lic_name
⋮┆----------------------------------------
1275┆ eval $3=\$url
⋮┆----------------------------------------
1283┆ eval $2=""
⋮┆----------------------------------------
1287┆ eval $2=\$link
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
179┆ local file=$1 enb=no var= val= IFS==
⋮┆----------------------------------------
556┆ IFS=
⋮┆----------------------------------------
560┆ IFS=$old_IFS
⋮┆----------------------------------------
995┆ IFS="&"
⋮┆----------------------------------------
1005┆ IFS=$old_IFS
⋮┆----------------------------------------
1037┆
IFS="
1038┆ "
⋮┆----------------------------------------
1054┆ IFS=$old_IFS
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/html/axis-cgi/lib/functions.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
257┆ eval tmpvar__=$(echo \$$n__) || :
⋮┆----------------------------------------
260┆ eval outvar__=$(echo \$$(($n__ + $nof_params__)))
⋮┆----------------------------------------
260┆ eval outvar__=$(echo \$$(($n__ + $nof_params__)))
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
25┆ [ -z "$3" ] || printf "Content-Length: %d\r\n" $3
⋮┆----------------------------------------
117┆ eval $ret__=\$mess__
⋮┆----------------------------------------
126┆ printf "Status: %d %s\r\n" $1 "$2"
⋮┆----------------------------------------
127┆ __cgi_hdgen yes $3
⋮┆----------------------------------------
128┆ [ $1 -lt 400 ] || printf "%d %s\r\n\r\n" $1 "$2"
⋮┆----------------------------------------
147┆ __cgi_errcode ctmess__ $code__
⋮┆----------------------------------------
149┆ __cgi_content $code__ "$ctmess__" $c_type__ $*
⋮┆----------------------------------------
158┆ __cgi_errcode hdmess__ $code__
⋮┆----------------------------------------
160┆ __cgi_content $code__ "$hdmess__" text/plain $*
⋮┆----------------------------------------
181┆ . $1
⋮┆----------------------------------------
230┆ return $reterr__
⋮┆----------------------------------------
252┆ set -- $*
⋮┆----------------------------------------
257┆ eval tmpvar__=$(echo \$$n__) || :
⋮┆----------------------------------------
260┆ eval outvar__=$(echo \$$(($n__ + $nof_params__)))
⋮┆----------------------------------------
263┆ n__=$(($n__ + 1))
⋮┆----------------------------------------
267┆ printf "%s" $outvar__
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
206┆ local inparam__=$1 IFS='&' param__
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/html/axis-cgi/lib/language/language.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
23┆ $cmd 0
⋮┆----------------------------------------
24┆ [ $2 -eq 0 ] || exit $2
⋮┆----------------------------------------
36┆ . $1 || {
⋮┆----------------------------------------
37┆ $LOGWARN "Could not source $2."
⋮┆----------------------------------------
41┆ country_code=$(echo $www_country_code | tr A-Z a-z)
⋮┆----------------------------------------
43┆ language_name=$(echo $product_language_name | tr A-Z a-z)
⋮┆----------------------------------------
57┆ match_name=$(echo $2 | tr A-Z a-z)
⋮┆----------------------------------------
62┆ ! __language_match $f $match_name || {
⋮┆----------------------------------------
63┆ echo ${f%/*}
⋮┆----------------------------------------
74┆ ls $BACKUP_DIRECTORY/* >/dev/null 2>&; then
⋮┆----------------------------------------
80┆ dd if=$f of=$UPLOAD_DIRECTORY/${f##*/}
bs=$BLOCK_SIZE 2>/dev/null ||
⋮┆----------------------------------------
81┆ $LOGWARN "Could not copy $f."
⋮┆----------------------------------------
105┆ $LOGWARN "Could not create a backup directory."
⋮┆----------------------------------------
109┆ $LOGWARN "Could not copy backup files."
⋮┆----------------------------------------
113┆ $LOGWARN "Language:$3 will be replaced using new language file."
⋮┆----------------------------------------
115┆ rm -rf $UPLOAD_DIRECTORY/$3 || :
⋮┆----------------------------------------
121┆ rm -f $dstdir/$basename.tmp
⋮┆----------------------------------------
122┆ cp $f $dstdir/$basename.tmp &&
⋮┆----------------------------------------
123┆ fsynced_write_or_cleanup $dstdir/$basename.tmp $dstdir/$basename ||
⋮┆----------------------------------------
124┆ $LOGCRIT "Failed to copy language file '$f'."
⋮┆----------------------------------------
127┆ rm -f $LOCAL_DIRECTORY/$basename.tmp
⋮┆----------------------------------------
128┆ cp $f $LOCAL_DIRECTORY/$basename.tmp &&
⋮┆----------------------------------------
129┆ fsynced_write_or_cleanup $LOCAL_DIRECTORY/$basename.tmp
$LOCAL_DIRECTORY/$basename ||
⋮┆----------------------------------------
130┆ $LOGWARN "Failed to copy '$f'."
⋮┆----------------------------------------
136┆ chmod 0755 $dstdir || $LOGWARN "Could not set permission for $dstdir."
⋮┆----------------------------------------
136┆ chmod 0755 $dstdir || $LOGWARN "Could not set permission for $dstdir."
⋮┆----------------------------------------
137┆ chmod 0644 $dstdir/* || $LOGWARN "Could not set permission in $dstdir."
⋮┆----------------------------------------
137┆ chmod 0644 $dstdir/* || $LOGWARN "Could not set permission in $dstdir."
⋮┆----------------------------------------
143┆ rm $SELECTED_DIRECTORY || :
⋮┆----------------------------------------
145┆ $LOGCRIT "Failed to link language files."
⋮┆----------------------------------------
147┆ rm -rf $LANGUAGE_DIRECTORY/css/*.css || :
⋮┆----------------------------------------
152┆ $LOGWARN "Could not link $s."
⋮┆----------------------------------------
164┆ rm $SELECTED_DIRECTORY/ || :
⋮┆----------------------------------------
166┆ $LOGCRIT "Failed to link language files."
⋮┆----------------------------------------
168┆ $LOGCRIT "Could not link default language."
⋮┆----------------------------------------
173┆ . $1/$LANGUAGE_INFO || {
⋮┆----------------------------------------
175┆ $LOGWARN "Failed to source $1/$LANGUAGE_INFO."
⋮┆----------------------------------------
180┆ rm -rf $LANGUAGE_DIRECTORY/css/*.css || :
⋮┆----------------------------------------
186┆ $LOGWARN "Failed to link $s."
⋮┆----------------------------------------
189┆ $LOGWARN "Failed to link $s."
⋮┆----------------------------------------
192┆ $LOGWARN "Failed to link $s."
⋮┆----------------------------------------
206┆ tmp_file=$(file_upload -S $CONTENT_LENGTH -n 204800 --allowed-realms=$realms
--allowed-dirs=$dirs) || ret=$?
⋮┆----------------------------------------
208┆ $LOGWARN "Failed to upload language file."
⋮┆----------------------------------------
209┆ __error "error=3" $ret
⋮┆----------------------------------------
213┆ $LOGWARN "Failed to source axis variables."
⋮┆----------------------------------------
218┆ $LOGWARN "Failed to create temporary language file."
⋮┆----------------------------------------
222┆ chmod -R 0755 $tmp_unpacked || :
⋮┆----------------------------------------
223┆ cd $tmp_unpacked
⋮┆----------------------------------------
230┆ rm -fr $tmp_unpacked || :
⋮┆----------------------------------------
231┆ $LOGWARN "Failed to unpack language file."
⋮┆----------------------------------------
232┆ __error "error=1" $ret
⋮┆----------------------------------------
238┆ rm -fr $tmp_unpacked || :
⋮┆----------------------------------------
239┆ __error "error=1" $ret
⋮┆----------------------------------------
245┆ rm -fr $tmp_unpacked || :
⋮┆----------------------------------------
246┆ __error "error=1" $ret
⋮┆----------------------------------------
254┆ rm -fr $tmp_unpacked || :
⋮┆----------------------------------------
255┆ __error "error=1" $ret
⋮┆----------------------------------------
258┆ . $tmp_unpacked/$lang_code/language.info || ret=$?
⋮┆----------------------------------------
260┆ $LOGWARN "Could not retrieve language info from uploaded file."
⋮┆----------------------------------------
261┆ rm -fr $tmp_unpacked || :
⋮┆----------------------------------------
262┆ __error "error=2" $ret
⋮┆----------------------------------------
265┆ . $SELECTED_INFO || {
⋮┆----------------------------------------
266┆ $LOGWARN "Could not source selected language."
⋮┆----------------------------------------
274┆ rm -rf $tmp_unpacked || :
⋮┆----------------------------------------
279┆ tmp_etc=$(mktemp -d $UPLOAD_DIRECTORY/language.XXXXXX) || {
⋮┆----------------------------------------
280┆ $LOGCRIT "Failed to create temporary language directory."
⋮┆----------------------------------------
281┆ rm -rf $tmp_unpacked || :
⋮┆----------------------------------------
286┆ rm -rf $tmp_unpacked || :
⋮┆----------------------------------------
294┆ $LOGINFO "No room for language."
⋮┆----------------------------------------
295┆ rm -rf $tmp_etc || :
⋮┆----------------------------------------
298┆ mv $tmp_etc/ $UPLOAD_DIRECTORY/$lang_code ||
⋮┆----------------------------------------
299┆ $LOGWARN "Failed to move temporary file."
⋮┆----------------------------------------
300┆ rm -rf $BACKUP_DIRECTORY || :
⋮┆----------------------------------------
303┆ . $UPLOAD_DIRECTORY/$lang_code/$LANGUAGE_INFO ||
⋮┆----------------------------------------
304┆ $LOGWARN "Failed to source uploaded language info."
⋮┆----------------------------------------
311┆ __error "$fail_msg" $ret
⋮┆----------------------------------------
338┆ lang_list=$(echo $HTTP_ACCEPT_LANGUAGE | tr ',' ' ')
⋮┆----------------------------------------
342┆ language=$(echo $language | tr A-Z a-z)
⋮┆----------------------------------------
343┆ if language_dir=$(__language_match_dir
$MINI_DIRECTORY $language); then
⋮┆----------------------------------------
349┆ if language_dir=$(__language_match_dir
$MINI_DIRECTORY $language); then
⋮┆----------------------------------------
355┆ . $SELECTED_INFO || $LOGWARN "Failed to source $SELECTED_INFO"
⋮┆----------------------------------------
355┆ . $SELECTED_INFO || $LOGWARN "Failed to source $SELECTED_INFO"
⋮┆----------------------------------------
366┆ __set_builtin_language $language_dir
⋮┆----------------------------------------
377┆ ! language_dir=$(__language_match_dir $UPLOAD_DIRECTORY $language) || {
⋮┆----------------------------------------
379┆ __set_builtin_language $language_dir
⋮┆----------------------------------------
384┆ ! language_dir=$(__language_match_dir $BUILTIN_DIRECTORY $language) || {
⋮┆----------------------------------------
386┆ __set_builtin_language $language_dir
⋮┆----------------------------------------
391┆ ! __language_match $DEFAULT_DIRECTORY/default/$LANGUAGE_INFO $language || {
⋮┆----------------------------------------
404┆ . $SELECTED_INFO || ret=1
⋮┆----------------------------------------
409┆ __set_file_language_meta top_incl.shtml $www_charset $www_country_code
⋮┆----------------------------------------
412┆ __set_file_language_meta top_incl_popup.shtml $www_charset $www_country_code
⋮┆----------------------------------------
415┆ __set_file_language_meta page_header.shtml $www_charset $www_country_code
⋮┆----------------------------------------
418┆ __set_file_language_meta popup_header.shtml $www_charset $www_country_code
⋮┆----------------------------------------
444┆ local tmp_top=$(mktemp $LANGUAGE_DIRECTORY/top_tmp.XXXXXX) || exit 1
⋮┆----------------------------------------
449┆ sed -re 's/(^[[:blank:]]*<eta.*[[:blank:]]charset=).*(".*)/\1'$charset'\2/'
$LANGUAGE_DIRECTORY/$file_name > $tmp_top || ret=1
⋮┆----------------------------------------
450┆ sed -i -re
's/(^[[:blank:]]*<eta[[:blank:]]+http-equiv="Content-language".*CONTENT=\").*(\".*)/\1'$country_code'\2/' $tmp_top ||
ret=1
⋮┆----------------------------------------
453┆ mv $tmp_top $LANGUAGE_DIRECTORY/$file_name || :
⋮┆----------------------------------------
455┆ $LOGWARN "Failed to update language metadata in $file_name. Falling back to default file"
⋮┆----------------------------------------
457┆ rm $tmp_top
⋮┆----------------------------------------
459┆ cp -a $DEFAULT_DIRECTORY/default/$file_name $LANGUAGE_DIRECTORY/$file_name ||
⋮┆----------------------------------------
460┆ $LOGWARN "Could not create $file_name."
⋮┆----------------------------------------
481┆ chmod $file_mode $LANGUAGE_DIRECTORY/$file_name ||
⋮┆----------------------------------------
482┆ $LOGWARN "Failed to set mode $file_mode for $file_name"
⋮┆----------------------------------------
484┆ chown $file_owner:$file_group $LANGUAGE_DIRECTORY/$file_name ||
⋮┆----------------------------------------
485┆ $LOGWARN "Failed to set ownership $file_owner:$file_group for $file_name"
⋮┆----------------------------------------
507┆ . $f || {
⋮┆----------------------------------------
508┆ $LOGWARN "Could not source $f."
⋮┆----------------------------------------
523┆ . $f || {
⋮┆----------------------------------------
524┆ $LOGWARN "Could not source $f."
⋮┆----------------------------------------
542┆ in_use=$(readlink $SELECTED_DIRECTORY) ||
⋮┆----------------------------------------
543┆ $LOGWARN "Could not determine current language."
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/html/axis-cgi/lib/language/language_viewer.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
15┆ . $f || {
⋮┆----------------------------------------
16┆ $LOGWARN "Failed to source $f."
⋮┆----------------------------------------
19┆ echo $product_language_name
⋮┆----------------------------------------
26┆ . $SELECTED_INFO || $LOGWARN "Could not retrieve language type."
⋮┆----------------------------------------
26┆ . $SELECTED_INFO || $LOGWARN "Could not retrieve language type."
⋮┆----------------------------------------
31┆ echo $product_language_type
⋮┆----------------------------------------
44┆ . $f || ret=1
⋮┆----------------------------------------
45┆ flag=$(echo $product_language_name | urldecode -e |
⋮┆----------------------------------------
65┆ . $f || ret=1
⋮┆----------------------------------------
76┆ . $f || {
⋮┆----------------------------------------
78┆ $LOGWARN "Could not source $f."
⋮┆----------------------------------------
80┆ tmp=$(echo $product_language_name)
⋮┆----------------------------------------
85┆ flag=$(echo $tmp | urldecode -e | tr A-Z a-z)
⋮┆----------------------------------------
96┆ . $DEFAULT_DIRECTORY/default/$LANGUAGE_INFO || {
⋮┆----------------------------------------
97┆ $LOGWARN "Could not retrieve default language info."
⋮┆----------------------------------------
100┆ lang=$(echo $product_language_name | tr A-Z a-z)
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/html/axis-cgi/lib/limited_access.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
20┆ for _line in $(tar -Oxf $1 $PKG_CONF_FILE); do
⋮┆----------------------------------------
36┆ __pkgconf_value $1 APPUSR _user
⋮┆----------------------------------------
37┆ __pkgconf_value $1 APPGRP _group
⋮┆----------------------------------------
50┆ command -v $CHECKSUM_CMD >/dev/null 2>&1 || {
⋮┆----------------------------------------
63┆ _checksum=$($CHECKSUM_CMD "$_eap_path" || :)
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
18┆ local
IFS='
19┆ '
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/html/axis-cgi/lib/systemlog.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
29┆ max_num_files=$(sed -rn 's/^[[:blank:]]rotate[[:blank:]]+//p'
$logrotate_file) ||
⋮┆----------------------------------------
35┆ max_num_files=$(($max_num_files + 1))
⋮┆----------------------------------------
37┆ [ "$lf_title__" != yes ] || __title $lf_title__ "System log"
⋮┆----------------------------------------
54┆ eval $cmd__ $logf__ ||
⋮┆----------------------------------------
60┆ [ "$lf_title__" != yes ] || __title $lf_title__ $3
⋮┆----------------------------------------
65┆ eval $cmd__ $3 || echo "$sn Failed to read file $3"
⋮┆----------------------------------------
89┆ __title $lf_title__ "Contents of $3 for '$appname__'"
⋮┆----------------------------------------
91┆ if __is_lua_application $appname__; then
⋮┆----------------------------------------
92┆ __do_show_logfile $* | grep
"monolith\[[0-9]\+\]:[[:blank:]]\+$appname__:\|[[:blank:]]\+$appname__\[[0-9]\+"
⋮┆----------------------------------------
94┆ __do_show_logfile $* | grep "[[:blank:]]\+$appname__\[[0-9]\+"
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/html/axis-cgi/virtualinput/virtual_input_common.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
26┆ logger -s -t${0##*/} -perr -- $*
⋮┆----------------------------------------
62┆ xml_error_resp $1 "$2"
⋮┆----------------------------------------
130┆ state_changed=$(gdbus call -y -d $DBUS_DEST -o $DBUS_OBJ$1 -m $2) ||
⋮┆----------------------------------------
145┆ success_reply $method $state_changed
⋮┆----------------------------------------
165┆ eval $1=\$port
⋮┆----------------------------------------
183┆ eval $1=\$version
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/cmpversions.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
35┆ _validate_vers $2 ||
⋮┆----------------------------------------
39┆ set -- $2
⋮┆----------------------------------------
40┆ eval $result=$#
⋮┆----------------------------------------
51┆ set -- $version
⋮┆----------------------------------------
54┆ eval tmp=\$$i
⋮┆----------------------------------------
56┆ eval $array$i=\$$i
⋮┆----------------------------------------
58┆ eval $array$i=0
⋮┆----------------------------------------
60┆ i=$(($i + 1))
⋮┆----------------------------------------
71┆ eval $arg=\${$arg#\\\"}
⋮┆----------------------------------------
72┆ eval $arg=\${$arg%\\\"}
⋮┆----------------------------------------
90┆ _validate_op $op || error "compare_vers: invalid operator '$op'"
⋮┆----------------------------------------
92┆ _nof_args nbr_count1 $version1 ||
⋮┆----------------------------------------
94┆ _nof_args nbr_count2 $version2 ||
⋮┆----------------------------------------
100┆ _split_vers v1_nbr_ $version1 $nbr
⋮┆----------------------------------------
101┆ _split_vers v2_nbr_ $version2 $nbr
⋮┆----------------------------------------
104┆ eval number1=\$v1_nbr_$i
⋮┆----------------------------------------
105┆ eval number2=\$v2_nbr_$i
⋮┆----------------------------------------
152┆ i=$(($i + 1))
⋮┆----------------------------------------
154┆ return $res
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
38┆ IFS=.
⋮┆----------------------------------------
49┆ local IFS=. array=$1 version=$2 i=1 nbr=$3 tmp
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/error.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
36┆ _message $SD_WARNING "!" "$*"
⋮┆----------------------------------------
43┆ _message $SD_ERR "!!!" "$*"
⋮┆----------------------------------------
51┆ _message $SD_INFO "+" "$*"
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/files.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
28┆ if fsync $1; then
⋮┆----------------------------------------
29┆ if mv -f $1 $2; then
⋮┆----------------------------------------
30┆ if ! fsync ${2%/*}; then
⋮┆----------------------------------------
49┆ [ -z "$1" ] || rm -f $1 || error "$_f: $error_msg. Unable to remove '$1'"
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/fsupgrade-functions.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
7┆ printf "%s: %s!\n" $TAG "$*" >&2
⋮┆----------------------------------------
23┆ command which $1 >/dev/null 2>&1
⋮┆----------------------------------------
57┆ if umount $1; then
⋮┆----------------------------------------
76┆ [ -d $1 ] || mkdir -p $1 ||
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/macaddress-read.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
17┆ validate_varname $1 || error "$_f: invalid variable name '$1' (arg 1)"
⋮┆----------------------------------------
21┆ eval $1=\$mac_def
⋮┆----------------------------------------
23┆ validate_varname $2 ||
⋮┆----------------------------------------
25┆ eval $2=\$mac_def
⋮┆----------------------------------------
31┆ [ ! -r $conf ] || . $conf || error "Failed to source '$conf'"
⋮┆----------------------------------------
33┆ [ -z "${MAC:-}" ] || mac_res=$(echo $MAC | tr a-f A-F)
⋮┆----------------------------------------
41┆ mac_res=$(echo $serno | tr a-f A-F |
⋮┆----------------------------------------
53┆ eval $1=\$mac_res
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/module.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
34┆ modprobe -r $1 || error "Failed to unload '$1'"
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/parhand-functions.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
16┆ retry=$(($retry - 1))
⋮┆----------------------------------------
28┆ until [ -e $PH_PIDFILE ]; do
⋮┆----------------------------------------
29┆ retry=$(($retry - 1))
⋮┆----------------------------------------
59┆ rm -f $PH_PIDFILE
⋮┆----------------------------------------
60┆ $PH /dev/null 50011 $uep -d $EDP $epp -upgrade &
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/string.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
162┆ shift $(($OPTIND - 1))
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
57┆ i=$(($i + 1))
⋮┆----------------------------------------
64┆ eval $1=\$lastc
⋮┆----------------------------------------
89┆ validate_varname $1 || error "$f: invalid variable name '$1'"
⋮┆----------------------------------------
131┆ eval $1=\$__prefix
⋮┆----------------------------------------
132┆ eval $2=\$__suffix
⋮┆----------------------------------------
162┆ shift $(($OPTIND - 1))
⋮┆----------------------------------------
171┆ eval $1=\$_prefix\$_suffix
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/systemd-generator.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
11┆ rm -f $_SERVICEDIR/$2.wants/$1
⋮┆----------------------------------------
21┆ mkdir -p $d || error "$_f: failed to create directory '$d'"
⋮┆----------------------------------------
22┆ ln -sf /lib/systemd/system/$1 $d/$1
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/systemd.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
7┆ eval $(systemctl show -p $v || :)
⋮┆----------------------------------------
14┆ eval $(systemctl show -p $v || :)
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
7┆ eval $(systemctl show -p $v || :)
⋮┆----------------------------------------
14┆ eval $(systemctl show -p $v || :)
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/sysvinit-functions.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
324┆ shift $(($OPTIND - 1))
⋮┆----------------------------------------
413┆ shift $(($OPTIND - 1))
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
22┆ [ ! -r $RCLIB/sh/files.sh ] || . $RCLIB/sh/files.sh
⋮┆----------------------------------------
68┆ eval $2="$_LFD/$__lf.lock" ||
⋮┆----------------------------------------
77┆ validate_lock_fn $1 _lf
⋮┆----------------------------------------
119┆ validate_lock_fn $1 _lf
⋮┆----------------------------------------
226┆ if check_pid $1; then
⋮┆----------------------------------------
267┆ kill -TERM $1 || return 1
⋮┆----------------------------------------
270┆ if check_pid $1 && sleep 1 &&
⋮┆----------------------------------------
271┆ check_pid $1 && sleep 2 &&
⋮┆----------------------------------------
272┆ check_pid $1 && sleep 3 &&
⋮┆----------------------------------------
273┆ check_pid $1; then
⋮┆----------------------------------------
274┆ kill -KILL $1
⋮┆----------------------------------------
324┆ shift $(($OPTIND - 1))
⋮┆----------------------------------------
413┆ shift $(($OPTIND - 1))
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/lib/rcscripts/sh/times.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
47┆ eval $_r=$(dc <<-EOF
48┆
$_m
49┆
60
50┆
*
51┆
$_s
52┆
+
53┆
$_t
54┆
+
55┆
p
56┆
EOF
[hid 1 additional lines, adjust with --max-lines-per-finding]
204┆ eval $_r=$(dc <<-EOF
205┆
$_uptime_now
206┆
$2
207┆
-
208┆
p
209┆
EOF
210┆
)
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
67┆ eval $1=0$2
⋮┆----------------------------------------
70┆ eval $1=$2
⋮┆----------------------------------------
80┆ validate_varname $1 || error "$f: invalid variable name '$1'"
⋮┆----------------------------------------
125┆ tmp_f=$(mktemp $fs_mp/$$.XXXXXX) || {
⋮┆----------------------------------------
137┆ _dc_times_calc t $t $u || break
⋮┆----------------------------------------
138┆ _dc_times_calc t $t $s || break
⋮┆----------------------------------------
140┆ rm -f $tmp_f
⋮┆----------------------------------------
142┆ zeropad_real t $t
⋮┆----------------------------------------
143┆ eval $_r=$t
⋮┆----------------------------------------
152┆ validate_varname $1 || error "$f: invalid variable name '$1'"
⋮┆----------------------------------------
169┆ validate_varname $1 || error "$f: invalid variable name '$1'"
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
20┆ IFS=ms
⋮┆----------------------------------------
22┆ IFS=$sIFS
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/sbin/api_setup_init.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
12┆ fsynced_write_or_cleanup $markerfile.tmp $markerfile ||
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/sbin/application_report.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
21┆ . $dir/$conffile
⋮┆----------------------------------------
24┆ printf "State: %s\n" $appstatus
⋮┆----------------------------------------
30┆ printf "Copy protection state: %s\n" $licstatus
⋮┆----------------------------------------
36┆ printf "\n%s/%s:\n" $dir $conffile
⋮┆----------------------------------------
41┆ printf "\n%s/%s:\n" $dir $cgiconf
⋮┆----------------------------------------
46┆ printf "\n%s/%s:\n" $dir $HTTPCGIPATHS
⋮┆----------------------------------------
50┆ printf "\n%s/%s:\n" $dir $licfile
⋮┆----------------------------------------
54┆ printf "error: Failed to read $conffile in %s\n" $dir
⋮┆----------------------------------------
66┆ output_info $appdir
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/sbin/coredump.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
26┆ ( tee /dev/fd/3 | /usr/sbin/coredump-handler $cmdlineargs ) 3>&1 | lzop>"$diskdumpfile.lzo"
⋮┆----------------------------------------
28┆ exec /usr/sbin/coredump-handler $cmdlineargs
⋮┆----------------------------------------
46┆ [ -d $extpath/$dumpsdir ] || mkdir $extpath/$dumpsdir || :
⋮┆----------------------------------------
54┆ [ ! -d $tmppath ] || [ -d $tmppath/$dumpsdir ] || mkdir $tmppath/$dumpsdir || :
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/sbin/gen_broker_passwd.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
25┆ printf '%s\n' "$users" | grep -F $user >/dev/null || users="$user $users"
⋮┆----------------------------------------
29┆ mkdir -p $RUN_DIR/user-pass
⋮┆----------------------------------------
32┆ touch $RUN_DIR/brok-pass
⋮┆----------------------------------------
33┆ chown mqtt-client:mqtt-client $RUN_DIR/brok-pass
⋮┆----------------------------------------
34┆ chmod 400 $RUN_DIR/brok-pass
⋮┆----------------------------------------
42┆ chown $user:mqtt-client $RUN_DIR/user-pass/$user
⋮┆----------------------------------------
43┆ chmod 400 $RUN_DIR/user-pass/$user
⋮┆----------------------------------------
46┆ /usr/bin/mosquitto_passwd -b $RUN_DIR/brok-pass $user $password
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/sbin/get_sia_osdp_verified_version.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
11┆ printf "%s" $UNKNOWN_VALUE
⋮┆----------------------------------------
16┆ [ -r $VARIABLESFILE ] && . $VARIABLESFILE 2>/dev/null ||
⋮┆----------------------------------------
19┆ printf "%s" $VERSION
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/sbin/get_ul_version.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
23┆ printf "%s" $UNKNOWN_VALUE
⋮┆----------------------------------------
28┆ [ -r $VARIABLESFILE ] && . $VARIABLESFILE 2>/dev/null ||
⋮┆----------------------------------------
37┆ count=$(($count + 1))
⋮┆----------------------------------------
39┆ count=$(($count + 1))
⋮┆----------------------------------------
51┆ printf "%s" $ul_version
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
31┆ IFS=.
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/sbin/install-package.sh
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
78┆ GROUPNAME=$(r=${APPNAME#?};f=${APPNAME%$r};echo $(echo $f | tr [:lower:] [:upper:])$r)
⋮┆----------------------------------------
402┆ cgi_path_dir=$INSTALLDIR/$DIRNAME/html/$(dirname $cgi_path) ||
⋮┆----------------------------------------
500┆ gdbus call -y -d com.axis.PolicyKitCert \
501┆ -o
/com/axis/PolicyKitCert \
502┆ -m
com.axis.PolicyKitCert.CertSetCreate \
503┆ "$CERTSETNAME" "$APPNAME"
"$CERTSETACTOR" \
504┆ "$CERTSETPROTOCOL" $(id -u $APPUSR)
||
⋮┆----------------------------------------
698┆ url_dir=$ACAP_DOC_ROOT/$acap_name/$(basename $subdir)
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
21┆ logger -t ${0##*/} -p INFO -- "$*"
⋮┆----------------------------------------
25┆ logger -t ${0##*/} -p WARNING -- "$*"
⋮┆----------------------------------------
29┆ logger -t ${0##*/} -p WARNING -- "$*"
⋮┆----------------------------------------
51┆ . ./$ADPPACKCFG || {
⋮┆----------------------------------------
64┆ XMLCONFFILE=$INSTALLDIR/$DIRNAME/$APPNAME
⋮┆----------------------------------------
75┆ ABSAPPNAME=$INSTALLDIR/$DIRNAME/$APPNAME
⋮┆----------------------------------------
78┆ GROUPNAME=$(r=${APPNAME#?};f=${APPNAME%$r};echo $(echo $f | tr [:lower:] [:upper:])$r)
⋮┆----------------------------------------
78┆ GROUPNAME=$(r=${APPNAME#?};f=${APPNAME%$r};echo $(echo $f | tr [:lower:] [:upper:])$r)
⋮┆----------------------------------------
203┆ chmod 755 $PKG_ETC_INIT_D_APPNAME.tmp ||
⋮┆----------------------------------------
205┆ fsynced_write_or_cleanup $PKG_ETC_INIT_D_APPNAME.tmp $PKG_ETC_INIT_D_APPNAME
⋮┆----------------------------------------
230┆ chmod 644 $ETC_SYSTEMD_APPNAME.tmp ||
⋮┆----------------------------------------
232┆ chown root:root $ETC_SYSTEMD_APPNAME.tmp ||
⋮┆----------------------------------------
234┆ fsynced_write_or_cleanup $ETC_SYSTEMD_APPNAME.tmp $ETC_SYSTEMD_APPNAME
⋮┆----------------------------------------
263┆ chmod 644 $ETC_SYSTEMD_APPNAME.tmp ||
⋮┆----------------------------------------
265┆ chown root:root $ETC_SYSTEMD_APPNAME.tmp ||
⋮┆----------------------------------------
267┆ fsynced_write_or_cleanup $ETC_SYSTEMD_APPNAME.tmp $ETC_SYSTEMD_APPNAME
⋮┆----------------------------------------
270┆ mkdir -p $ETC_SYSTEMD_APPDIR ||
⋮┆----------------------------------------
277┆ chmod 644 $ETC_SYSTEMD_NETFILE.tmp ||
⋮┆----------------------------------------
279┆ chown root:root $ETC_SYSTEMD_NETFILE.tmp ||
⋮┆----------------------------------------
281┆ fsynced_write_or_cleanup $ETC_SYSTEMD_NETFILE.tmp $ETC_SYSTEMD_NETFILE
⋮┆----------------------------------------
294┆ rm -f $transfer_link || error "Failed to remove link: $transfer_link"
⋮┆----------------------------------------
310┆ chmod 644 $transfer_conf.tmp
⋮┆----------------------------------------
311┆ chown www:www $transfer_conf.tmp
⋮┆----------------------------------------
313┆ fsynced_write_or_cleanup $transfer_conf.tmp $transfer_conf
⋮┆----------------------------------------
315┆ ln -sf $transfer_conf $transfer_link ||
⋮┆----------------------------------------
317┆ chown -h www:www $transfer_link
⋮┆----------------------------------------
327┆ rm -f $mime_link || error "Failed to remove link: $mime_link"
⋮┆----------------------------------------
334┆ chmod 644 $mime_conf.tmp
⋮┆----------------------------------------
335┆ chown www:www $mime_conf.tmp
⋮┆----------------------------------------
337┆ fsynced_write_or_cleanup $mime_conf.tmp $mime_conf
⋮┆----------------------------------------
339┆ ln -sf $mime_conf $mime_link ||
⋮┆----------------------------------------
341┆ chown -h www:www $mime_link
⋮┆----------------------------------------
352┆ ln -sf $PKG_ETC_INIT_D_APPNAME $ETC_INIT_D_APPNAME ||
⋮┆----------------------------------------
357┆ ln -sfn $INSTALLDIR/$DIRNAME/html $WEB_DIR/$APPNAME ||
⋮┆----------------------------------------
374┆ printf "%s" "$cgi_path" | grep -q $path_validation_expr ||
⋮┆----------------------------------------
381┆ chmod 644 $tmp_file || error "Failed to chmod: $tmp_file"
⋮┆----------------------------------------
383┆ fsynced_write_or_cleanup $tmp_file $PKG_CONFDIR/$HTTPCGIPATHS
⋮┆----------------------------------------
385┆ ln -sf $PKG_CONFDIR/$HTTPCGIPATHS $ETC_TRANSFER_CONF/transfer_$APPNAME.conf ||
⋮┆----------------------------------------
402┆ cgi_path_dir=$INSTALLDIR/$DIRNAME/html/$(dirname $cgi_path) ||
⋮┆----------------------------------------
405┆ cgi_path_file=$cgi_path_dir/$(basename $cgi_path) ||
⋮┆----------------------------------------
408┆ mkdir -p $cgi_path_dir ||
⋮┆----------------------------------------
411┆ find $cgi_path_dir -type d | xargs chown sdk:sdk ||
⋮┆----------------------------------------
417┆ chgrp $owner $cgi_path_file.tmp ||
⋮┆----------------------------------------
420┆ chmod 0750 $cgi_path_file.tmp ||
⋮┆----------------------------------------
423┆ fsynced_write_or_cleanup $cgi_path_file.tmp $cgi_path_file
⋮┆----------------------------------------
435┆ chmod 0640 $lic_file ||
⋮┆----------------------------------------
438┆ ln -sf $lic_file $INSTALLDIR/$DIRNAME/html/LICENSE >/dev/null 2>&1 ||
⋮┆----------------------------------------
443┆ for dir in $(find $INSTALLDIR/$DIRNAME/html -type d); do
⋮┆----------------------------------------
444┆ chmod 751 $dir || error "Failed to set permissions html"
⋮┆----------------------------------------
447┆ install_urls $APPNAME $INSTALLDIR/$DIRNAME/html ||
⋮┆----------------------------------------
450┆ chown $APPUSR:www $INSTALLDIR/$DIRNAME/html ||
⋮┆----------------------------------------
455┆ chown $APPUSR:www $lic_file ||
⋮┆----------------------------------------
460┆ ln -sf $PKG_ETC_DYN_APP_CONF $ETC_DYN_APP_CONF ||
⋮┆----------------------------------------
465┆ ln -sf $PKG_ETC_DYN_PARAM_APP_CONF $ETC_DYN_PARAM_APP_CONF ||
⋮┆----------------------------------------
470┆ ln -sf $PKG_DBUS_FILE $DBUS_FILE ||
⋮┆----------------------------------------
483┆ $PHC readgroupfile $ETC_DYN_PARAM_APP_CONF ||
⋮┆----------------------------------------
504┆ "$CERTSETPROTOCOL" $(id -u $APPUSR) ||
⋮┆----------------------------------------
539┆ chmod 755 $ABSAPPNAME || error "Failed to change permissions on $ABSAPPNAME"
⋮┆----------------------------------------
554┆ mkdir -p $DATA_DIR || error "Failed to create dir $DATA_DIR"
⋮┆----------------------------------------
556┆ chown $APPUSR:$APPGRP $DATA_DIR ||
⋮┆----------------------------------------
559┆ mkdir -p $ETC_DYN_PARAM || error "Failed to create dir $ETC_DYN_PARAM"
⋮┆----------------------------------------
560┆ mkdir -p $ETC_DYN || error "Failed to create dir $ETC_DYN"
⋮┆----------------------------------------
573┆ entry=$(echo $line | sed -rne
's/^[[:space:]]*([[:alnum:]]*)[[:space:]]*=[[:space:]]*"?([^"]*)"?.*/\1="\2"/p')
⋮┆----------------------------------------
575┆ type=$(echo $line | sed -rne 's/.*type[[:space:]]*=[[:space:]]*"([^"]*)"[[:space:]]*$/\1/p')
⋮┆----------------------------------------
584┆ echo $entry >> $PKG_ETC_DYN_APP_CONF.tmp
⋮┆----------------------------------------
590┆ chown $APPUSR:$APPGRP $PKG_ETC_DYN_APP_CONF.tmp ||
⋮┆----------------------------------------
593┆ chown $APPUSR:$APPGRP $PKG_ETC_DYN_PARAM_APP_CONF.tmp ||
⋮┆----------------------------------------
596┆ fsynced_write_or_cleanup $PKG_ETC_DYN_APP_CONF.tmp $PKG_ETC_DYN_APP_CONF
⋮┆----------------------------------------
597┆ fsynced_write_or_cleanup $PKG_ETC_DYN_PARAM_APP_CONF.tmp $PKG_ETC_DYN_PARAM_APP_CONF
⋮┆----------------------------------------
620┆ chmod 644 $PKG_DBUS_FILE.tmp || error "Failed to chmod on $PKG_DBUS_FILE.tmp"
⋮┆----------------------------------------
621┆ fsynced_write_or_cleanup $PKG_DBUS_FILE.tmp $PKG_DBUS_FILE
⋮┆----------------------------------------
672┆ files=$(ls -A $dir)
⋮┆----------------------------------------
675┆ add_file_to_url_conf $url_conf_file $dir/$file
⋮┆----------------------------------------
689┆ rm -f $url_conf_file 1>/dev/null 2>&1
⋮┆----------------------------------------
690┆ rm -f $url_conf_tmpfile 1>/dev/null 2>&1
⋮┆----------------------------------------
691┆ dirs=$(find $dir -type d)
⋮┆----------------------------------------
698┆ url_dir=$ACAP_DOC_ROOT/$acap_name/$(basename $subdir)
⋮┆----------------------------------------
704┆ gen_url_conf $url_conf_tmpfile $subdir
⋮┆----------------------------------------
711┆ fsynced_write_or_cleanup $url_conf_tmpfile $url_conf_file
⋮┆----------------------------------------
721┆ [ ! -d "$BAK_DIR" ] || rm -rf $BAK_DIR
⋮┆----------------------------------------
724┆ handle_eventdecl -d $INSTALLDIR/$DIRNAME/declarations -n $APPNAME -a ||
⋮┆----------------------------------------
727┆ mkdir -p $PKG_CONFDIR || error "Failed to mkdir -p $PKG_CONFDIR"
⋮┆----------------------------------------
729┆ chmod 755 $PKG_CONFDIR || error "Failed to change permissions on $PKG_CONFDIR"
⋮┆----------------------------------------
733┆ chmod 644 $RUNSTATE_CONF.tmp || error "Failed to change permissions on $RUNSTATE_CONF.tmp"
⋮┆----------------------------------------
734┆ fsynced_write_or_cleanup $RUNSTATE_CONF.tmp $RUNSTATE_CONF
⋮┆----------------------------------------
737┆ chown -Rh $APPUSR:admin $INSTALLDIR/$DIRNAME ||
⋮┆----------------------------------------
741┆ mkdir -p $INSTALLDIR/$DIRNAME/html ||
⋮┆----------------------------------------
752┆ if __restore_app $INSTALLDIR/$DIRNAME $BAK_DIR; then
⋮┆----------------------------------------
760┆ chmod 644 $INSTALLDIR/$DIRNAME/$ADPPACKCFG || {
⋮┆----------------------------------------
767┆ printf
"\
768┆ [Unit]
769┆ Description=%s
770┆
771┆ [Service]
772┆ User=%s
773┆ Type=oneshot
774┆ ExecStart=/bin/sh %s
775┆ WorkingDirectory=%s/%s
776┆ " $PREUPGRADE_SERVICE $1 $2 $INSTALLDIR $APPNAME > $ETC_SYSTEMD_DIR/$PREUPGRADE_SERVICE_FILENAME
⋮┆----------------------------------------
781┆ rm $ETC_SYSTEMD_DIR/$PREUPGRADE_SERVICE_FILENAME ||
⋮┆----------------------------------------
798┆ create_preupgrade_service $APPUSR $1
⋮┆----------------------------------------
800┆ systemctl --quiet start $PREUPGRADE_SERVICE >/dev/null 2>&1 || {
⋮┆----------------------------------------
802┆ systemctl --quiet reset-failed $PREUPGRADE_SERVICE > /dev/null 2>&1 ||
⋮┆----------------------------------------
810┆ execpath=$INSTALLDIR/$APPNAME/$POSTINSTALLSCRIPT
⋮┆----------------------------------------
813┆ printf
"\
814┆ [Unit]
815┆ Description=%s
816┆
817┆ [Service]
818┆ User=%s
819┆ Type=oneshot
820┆ ExecStart=/bin/sh %s 2>&1
821┆ WorkingDirectory=%s
822┆ StandardOutput=file:%s
[hid 2 additional lines, adjust with --max-lines-per-finding]
829┆ rm $ETC_SYSTEMD_DIR/$POSTINSTALL_SERVICE_FILENAME ||
⋮┆----------------------------------------
842┆ create_postinstall_service $APPUSR
⋮┆----------------------------------------
849┆ systemctl --quiet status $POSTINSTALL_SERVICE >/dev/null 2>&1 || [ $? != 4 ] || {
⋮┆----------------------------------------
853┆ systemctl --quiet start $POSTINSTALL_SERVICE >/dev/null 2>&1 || {
⋮┆----------------------------------------
855┆ systemctl --quiet reset-failed $POSTINSTALL_SERVICE > /dev/null 2>&1 ||
⋮┆----------------------------------------
860┆ chmod 644 $INSTALLDIR/$DIRNAME/$ADPPACKCFG || {
⋮┆----------------------------------------
867┆ rm -f $ETC_TRANSFER_CONF/transfer_$APPNAME.conf
⋮┆----------------------------------------
868┆ rm -f $ETC_TRANSFER_CONF/legacy_transfer_$APPNAME.conf
⋮┆----------------------------------------
869┆ rm -f $ETC_MIME_CONF/legacy_mime_$APPNAME.conf
⋮┆----------------------------------------
870┆ rm -rf $HTTP_VAR_RUN/$APPNAME
⋮┆----------------------------------------
872┆ rm -f $ETC_DYN_PARAM_APP_CONF
⋮┆----------------------------------------
873┆ rm -f $ETC_DYN_APP_CONF
⋮┆----------------------------------------
874┆ $PHC deletegroup $GROUPNAME >/dev/null 2>&1 || :
⋮┆----------------------------------------
878┆ rm -rf $INSTALLDIR/$DIRNAME
⋮┆----------------------------------------
889┆ eval enb=$val
⋮┆----------------------------------------
892┆ $log_info "unknown runstate $var for $APPNAME"
⋮┆----------------------------------------
897┆ $log_info "no runstate for $APPNAME"
⋮┆----------------------------------------
899┆ echo $enb
⋮┆----------------------------------------
908┆ systemctl --quiet enable $SYSTEMD_SERVICE_FILENAME >/dev/null 2>&1 ||
⋮┆----------------------------------------
922┆ handle_eventdecl -d $INSTALLDIR/$DIRNAME/declarations -n $APPNAME -r
⋮┆----------------------------------------
924┆ rm -rf $WEB_DIR/$APPNAME
⋮┆----------------------------------------
927┆ rm -f $ETC_INIT_D_APPNAME
⋮┆----------------------------------------
929┆ rm -f $ETC_SYSTEMD_APPNAME
⋮┆----------------------------------------
930┆ rm -rf $ETC_SYSTEMD_APPDIR
⋮┆----------------------------------------
931┆ rm -f $DBUS_FILE
⋮┆----------------------------------------
948┆ run_pre_upgrade $2
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.security.ifs-tampering
The special variable IFS affects how splitting takes place when expanding unquoted
variables. Don't set it globally. Prefer a dedicated utility such as 'cut' or 'awk' if you
need to split input data. If you must use 'read', set IFS locally using e.g. 'IFS="," read
-a my_array'.
883┆ local enb=no var= val= IFS==
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/sbin/populate-extfs.sh
external.semgrep-rules.bash.lang.best-practice.iteration-over-ls-output
Iterating over ls output is fragile. Use globs, e.g. 'dir/*' instead of '$(ls dir)'.
92┆ for i in `ls $INODE_DIR`; do
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.best-practice.useless-cat
Useless call to 'cat' in a pipeline. Use '<' and '>' for any command to read from a file or
write to a file.
100┆ LN_CNT=`cat $INODE_DIR/$i | wc -l`
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-command-substitution-in-command
The result of command substitution $(...) or `...`, if unquoted, is split on whitespace or
other separators specified by the IFS variable. You should surround it with double quotes to
avoid splitting the result.
26┆ CONTRIB_DIR=$(dirname $(readlink -f $0))
⋮┆----------------------------------------
88┆ eval `echo $i | sed 's$###$ $'`
⋮┆----------------------------------------
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
26┆ CONTRIB_DIR=$(dirname $(readlink -f $0))
⋮┆----------------------------------------
32┆ find $SRCDIR | while read FILE; do
⋮┆----------------------------------------
47┆ STAT=$(stat -c "TYPE=\"%F\";DEVNO=\"0x%t 0x%T\";MODE=\"%f\";U=\"%u\";G=\"%g\"" $FILE)
⋮┆----------------------------------------
48┆ eval $STAT
⋮┆----------------------------------------
58┆ LINK_TGT=$(readlink $FILE)
⋮┆----------------------------------------
87┆ for i in `find $SRCDIR -type f -links +1 -printf 'INODE=%i###FN=%p\n'`; do
⋮┆----------------------------------------
88┆ eval `echo $i | sed 's$###$ $'`
⋮┆----------------------------------------
89┆ echo ${FN#$SRCDIR} >>$INODE_DIR/$INODE
⋮┆----------------------------------------
92┆ for i in `ls $INODE_DIR`; do
⋮┆----------------------------------------
94┆ SRC=`head -1 $INODE_DIR/$i`
⋮┆----------------------------------------
96┆ for TGT in `sed -n -e '1!p' $INODE_DIR/$i`; do
⋮┆----------------------------------------
100┆ LN_CNT=`cat $INODE_DIR/$i | wc -l`
⋮┆----------------------------------------
104┆ rm -fr $INODE_DIR
⋮┆----------------------------------------
105┆ } | $DEBUGFS -w -f - $DEVICE
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/share/keyutils/request-key-debug.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
19┆ echo RQDebug keyid: $1
⋮┆----------------------------------------
20┆ echo RQDebug desc: $2
⋮┆----------------------------------------
21┆ echo RQDebug callout: $3
⋮┆----------------------------------------
22┆ echo RQDebug session keyring: $4
⋮┆----------------------------------------
26┆ keyctl instantiate $1 "Debug $3" $4 || exit 1
⋮┆----------------------------------------
29┆ echo keyctl negate $1 30 $4
⋮┆----------------------------------------
30┆ keyctl negate $1 30 $4
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/share/serverreport.d/customheader_report.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
4┆ . $rc || error "Failed to source '$rc'"
⋮┆----------------------------------------
9┆ cat $confpath/$conffile 2>&1 || :
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/share/serverreport.d/feature-flag.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
5┆ . $rc || error "Failed to source '$rc'"
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/share/serverreport.d/lldp_status.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
5┆ . $rc || error "Failed to source '$rc'"
⋮┆----------------------------------------
12┆ lldp_neigh_info=$($PK_LLDPCLI s show-neighbors 2>&1) ||
⋮┆----------------------------------------
16┆ echo $lldp_neigh_info | sed -e 's#\\n$##;s#\\n#\n#g'
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/share/serverreport.d/mqtt_config.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
5┆ . $rc || error "Failed to source '$rc'"
⋮┆----------------------------------------
11┆ sed -re "s/^(password=).*/\\1*****/" $f
⋮┆----------------------------------------
19┆ status=$(busctl call $service $path $interface GetDefaultStatus 2>/dev/null || :)
⋮┆----------------------------------------
25┆ echo Client status: $state
⋮┆----------------------------------------
26┆ echo Connection status: $connection
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/share/serverreport.d/ntp_status.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
5┆ . $rc || error "Failed to source '$rc'"
⋮┆----------------------------------------
16┆ if _ret=$($GET_PROP_CMD $1 $2 2>&1); then
⋮┆----------------------------------------
21┆ echo $2
⋮┆----------------------------------------
25┆ echo $* | tr -d '"'
⋮┆----------------------------------------
38┆ get_ntp_property com.axis.NTP1 $1
⋮┆----------------------------------------
43┆ get_ntp_property com.axis.NTP1.Server $1
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/share/serverreport.d/sdcard-report.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
9┆ . $rc || error "Failed to source %c$rc%c"
⋮┆----------------------------------------
12┆ . $rc || error "Failed to source '$rc'"
⋮┆----------------------------------------
23┆ [ ! -r $1/device/$var ] || read $var <$1/device/$var
⋮┆----------------------------------------
26┆ printf "name: %s\n" ${name:-NA}
⋮┆----------------------------------------
27┆ printf "date: %s\n" ${date:-NA}
⋮┆----------------------------------------
28┆ printf "type: %s\n" ${type:-NA}
⋮┆----------------------------------------
29┆ printf "oemid: %s\n" ${oemid:-NA}
⋮┆----------------------------------------
30┆ printf "fwrev: %s\n" ${fwrev:-NA}
⋮┆----------------------------------------
31┆ printf "manfid: %s\n" ${manfid:-NA}
⋮┆----------------------------------------
32┆ printf "serial: %s\n" ${serial:-NA}
⋮┆----------------------------------------
33┆ printf "hwrev: %s\n" ${hwrev:-NA}
⋮┆----------------------------------------
34┆ printf "cid: %s\n" ${cid:-NA}
⋮┆----------------------------------------
35┆ printf "csd: %s\n" ${csd:-NA}
⋮┆----------------------------------------
39┆ print_common_info $1
⋮┆----------------------------------------
42┆ printf "scr: %s\n" ${scr:-NA}
⋮┆----------------------------------------
46┆ print_common_info $1
⋮┆----------------------------------------
52┆ printf "EXT_CSD_REV: %s\n" $rev
⋮┆----------------------------------------
54┆ !exists $udevadm ||
⋮┆----------------------------------------
55┆ device=/dev/$(udevadm info --query=name $1 2>/dev/null) || :
⋮┆----------------------------------------
58┆ ! exists $mmcreadblock ||
⋮┆----------------------------------------
59┆ $mmcreadblock $device 8 | sed -e "s/^/EXTCSD: /" || :
⋮┆----------------------------------------
61┆ ! exists $mmchealth || $mmchealth $device || :
⋮┆----------------------------------------
61┆ ! exists $mmchealth || $mmchealth $device || :
⋮┆----------------------------------------
80┆ print_emmc_info $sd_base$i
⋮┆----------------------------------------
85┆ print_card_info $sd_base$i
⋮┆----------------------------------------
89┆ i=$(($i + 1))
/logs/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/us
r/share/syslog-ng/include/scl/loadbalancer/gen-loadbalancer.sh
external.semgrep-rules.bash.lang.correctness.unquoted-variable-expansion-in-command
Variable expansions must be double-quoted so as to prevent being split into multiple pieces
according to whitespace or whichever separator is specified by the IFS variable. If you
really wish to split the variable's contents, you may use a variable that starts with an
underscore e.g. $_X instead of $X, and semgrep will ignore it. If what you need is an array,
consider using a proper bash array.
27┆ target_cnt=$(echo $TARGETS | wc -w)
⋮┆----------------------------------------
36┆ echo -n $target_id
⋮┆----------------------------------------
38┆ echo -n $target_cnt
⋮┆----------------------------------------
43┆ echo -n $target
⋮┆----------------------------------------
45┆ echo -n $TARGET_PARAMS
┌──────────────┐
│ Scan Summary │
└──────────────┘
Some files were skipped or only partially analyzed.
Partially scanned: 9 files only partially analyzed due to parsing or internal Semgrep errors
Ran 7 rules on 73 files: 885 findings.
