-----------------------------------------------------------------
[*] Emulating binary name: ubimkvol.mtd-utils
[*] Emulator used: qemu-arm-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract (1/2)
[*] Using CPU config:
[*] Emulating binary: /usr/sbin/ubimkvol.mtd-utils
[*] Change permissions +x to /logs/s115_usermode_emulator/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/./usr/sbin/ubimkvol.mtd-utils.
[*] Emulating binary ./usr/sbin/ubimkvol.mtd-utils with parameter NONE
ubimkvol: error!: volume size was not specified (use -h for help)
[*] Emulating binary ./usr/sbin/ubimkvol.mtd-utils with parameter -v
./usr/sbin/ubimkvol.mtd-utils: invalid option -- 'v'
ubimkvol version 2.1.3 - a tool to create UBI volumes.
Usage: ubimkvol <UBI device node file name> [-h] [-a <alignment>] [-n <volume ID>] [-N <name>]
[-s <bytes>] [-S <LEBs>] [-t <static|dynamic>] [-V] [-m] [-k]
[--alignment=<alignment>][--vol_id=<volume ID>] [--name=<name>]
[--size=<bytes>] [--lebs=<LEBs>] [--type=<static|dynamic>] [--help]
[--version] [--maxavsize] [--skipcheck]
Example: ubimkvol /dev/ubi0 -s 20MiB -N config_data - create a 20 Megabytes volume
named "config_data" on UBI device /dev/ubi0.
-a, --alignment=<alignment> volume alignment (default is 1)
-n, --vol_id=<volume ID> UBI volume ID, if not specified, the volume ID
will be assigned automatically
-N, --name=<name> volume name
-s, --size=<bytes> volume size volume size in bytes, kilobytes (KiB)
or megabytes (MiB)
-S, --lebs=<LEBs count> alternative way to give volume size in logical
eraseblocks
-m, --maxavsize set volume size to maximum available size
-t, --type=<static|dynamic> volume type (dynamic, static), default is dynamic
-k, --skipcheck skip the CRC check done at volume open time
-h, -?, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubimkvol.mtd-utils with parameter -V
ubimkvol (mtd-utils) 2.1.3
[*] Emulating binary ./usr/sbin/ubimkvol.mtd-utils with parameter -h
ubimkvol version 2.1.3 - a tool to create UBI volumes.
Usage: ubimkvol <UBI device node file name> [-h] [-a <alignment>] [-n <volume ID>] [-N <name>]
[-s <bytes>] [-S <LEBs>] [-t <static|dynamic>] [-V] [-m] [-k]
[--alignment=<alignment>][--vol_id=<volume ID>] [--name=<name>]
[--size=<bytes>] [--lebs=<LEBs>] [--type=<static|dynamic>] [--help]
[--version] [--maxavsize] [--skipcheck]
Example: ubimkvol /dev/ubi0 -s 20MiB -N config_data - create a 20 Megabytes volume
named "config_data" on UBI device /dev/ubi0.
-a, --alignment=<alignment> volume alignment (default is 1)
-n, --vol_id=<volume ID> UBI volume ID, if not specified, the volume ID
will be assigned automatically
-N, --name=<name> volume name
-s, --size=<bytes> volume size volume size in bytes, kilobytes (KiB)
or megabytes (MiB)
-S, --lebs=<LEBs count> alternative way to give volume size in logical
eraseblocks
-m, --maxavsize set volume size to maximum available size
-t, --type=<static|dynamic> volume type (dynamic, static), default is dynamic
-k, --skipcheck skip the CRC check done at volume open time
-h, -?, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubimkvol.mtd-utils with parameter -help
ubimkvol version 2.1.3 - a tool to create UBI volumes.
Usage: ubimkvol <UBI device node file name> [-h] [-a <alignment>] [-n <volume ID>] [-N <name>]
[-s <bytes>] [-S <LEBs>] [-t <static|dynamic>] [-V] [-m] [-k]
[--alignment=<alignment>][--vol_id=<volume ID>] [--name=<name>]
[--size=<bytes>] [--lebs=<LEBs>] [--type=<static|dynamic>] [--help]
[--version] [--maxavsize] [--skipcheck]
Example: ubimkvol /dev/ubi0 -s 20MiB -N config_data - create a 20 Megabytes volume
named "config_data" on UBI device /dev/ubi0.
-a, --alignment=<alignment> volume alignment (default is 1)
-n, --vol_id=<volume ID> UBI volume ID, if not specified, the volume ID
will be assigned automatically
-N, --name=<name> volume name
-s, --size=<bytes> volume size volume size in bytes, kilobytes (KiB)
or megabytes (MiB)
-S, --lebs=<LEBs count> alternative way to give volume size in logical
eraseblocks
-m, --maxavsize set volume size to maximum available size
-t, --type=<static|dynamic> volume type (dynamic, static), default is dynamic
-k, --skipcheck skip the CRC check done at volume open time
-h, -?, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubimkvol.mtd-utils with parameter --help
ubimkvol version 2.1.3 - a tool to create UBI volumes.
Usage: ubimkvol <UBI device node file name> [-h] [-a <alignment>] [-n <volume ID>] [-N <name>]
[-s <bytes>] [-S <LEBs>] [-t <static|dynamic>] [-V] [-m] [-k]
[--alignment=<alignment>][--vol_id=<volume ID>] [--name=<name>]
[--size=<bytes>] [--lebs=<LEBs>] [--type=<static|dynamic>] [--help]
[--version] [--maxavsize] [--skipcheck]
Example: ubimkvol /dev/ubi0 -s 20MiB -N config_data - create a 20 Megabytes volume
named "config_data" on UBI device /dev/ubi0.
-a, --alignment=<alignment> volume alignment (default is 1)
-n, --vol_id=<volume ID> UBI volume ID, if not specified, the volume ID
will be assigned automatically
-N, --name=<name> volume name
-s, --size=<bytes> volume size volume size in bytes, kilobytes (KiB)
or megabytes (MiB)
-S, --lebs=<LEBs count> alternative way to give volume size in logical
eraseblocks
-m, --maxavsize set volume size to maximum available size
-t, --type=<static|dynamic> volume type (dynamic, static), default is dynamic
-k, --skipcheck skip the CRC check done at volume open time
-h, -?, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubimkvol.mtd-utils with parameter --version
ubimkvol (mtd-utils) 2.1.3
[*] Emulating binary ./usr/sbin/ubimkvol.mtd-utils with parameter version
ubimkvol: error!: volume size was not specified (use -h for help)
-----------------------------------------------------------------
