-----------------------------------------------------------------
[*] Emulating binary name: ubiattach.mtd-utils
[*] Emulator used: qemu-arm-static
[*] Using root directory: /logs/s115_usermode_emulator/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract (1/2)
[*] Using CPU config:
[*] Emulating binary: /usr/sbin/ubiattach.mtd-utils
[*] Change permissions +x to /logs/s115_usermode_emulator/firmware/patool_extraction/rootfs.img_unblob_extracted/rootfs.img_extract/0-50593792.squashfs_v4_le_extract/./usr/sbin/ubiattach.mtd-utils.
[*] Emulating binary ./usr/sbin/ubiattach.mtd-utils with parameter NONE
ubiattach: error!: MTD device to attach was not specified (use -h for help)
[*] Emulating binary ./usr/sbin/ubiattach.mtd-utils with parameter -v
./usr/sbin/ubiattach.mtd-utils: invalid option -- 'v'
Use -h for help
[*] Emulating binary ./usr/sbin/ubiattach.mtd-utils with parameter -V
ubiattach (mtd-utils) 2.1.3
[*] Emulating binary ./usr/sbin/ubiattach.mtd-utils with parameter -h
ubiattach version 2.1.3 - a tool to attach MTD device to UBI.
Usage: ubiattach [<UBI control device node file name>]
[-m <MTD device number>] [-d <UBI device number>] [-p <path to device>]
[--mtdn=<MTD device number>] [--devn=<UBI device number>]
[--dev-path=<path to device>]
[--max-beb-per1024=<aximum bad block number per 1024 blocks>]
UBI control device defaults to /dev/ubi_ctrl if not supplied.
Example 1: ubiattach -p /dev/mtd0 - attach /dev/mtd0 to UBI
Example 2: ubiattach -m 0 - attach MTD device 0 (mtd0) to UBI
Example 3: ubiattach -m 0 -d 3 - attach MTD device 0 (mtd0) to UBI
and create UBI device number 3 (ubi3)
Example 4: ubiattach -m 1 -b 25 - attach /dev/mtd1 to UBI and reserve
25*C/1024 eraseblocks for bad block handling, where C is the flash
is total flash chip eraseblocks count, that is flash chip size in
eraseblocks (including bad eraseblocks). E.g., if the flash chip
has 4096 PEBs, 100 will be reserved.
-d, --devn=<number> the number to assign to the newly created UBI device
(assigned automatically if this is not specified)
-p, --dev-path=<path> path to MTD device node to attach
-m, --mtdn=<number> MTD device number to attach (alternative method, e.g
if the character device node does not exist)
-O, --vid-hdr-offset VID header offset (do not specify this unless you really
know what you are doing, the default should be optimal)
-b, --max-beb-per1024 maximum expected bad block number per 1024 eraseblock.
The default value is correct for most NAND devices.
Allowed range is 0-768, 0 means the default kernel value.
-h, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubiattach.mtd-utils with parameter -help
ubiattach version 2.1.3 - a tool to attach MTD device to UBI.
Usage: ubiattach [<UBI control device node file name>]
[-m <MTD device number>] [-d <UBI device number>] [-p <path to device>]
[--mtdn=<MTD device number>] [--devn=<UBI device number>]
[--dev-path=<path to device>]
[--max-beb-per1024=<aximum bad block number per 1024 blocks>]
UBI control device defaults to /dev/ubi_ctrl if not supplied.
Example 1: ubiattach -p /dev/mtd0 - attach /dev/mtd0 to UBI
Example 2: ubiattach -m 0 - attach MTD device 0 (mtd0) to UBI
Example 3: ubiattach -m 0 -d 3 - attach MTD device 0 (mtd0) to UBI
and create UBI device number 3 (ubi3)
Example 4: ubiattach -m 1 -b 25 - attach /dev/mtd1 to UBI and reserve
25*C/1024 eraseblocks for bad block handling, where C is the flash
is total flash chip eraseblocks count, that is flash chip size in
eraseblocks (including bad eraseblocks). E.g., if the flash chip
has 4096 PEBs, 100 will be reserved.
-d, --devn=<number> the number to assign to the newly created UBI device
(assigned automatically if this is not specified)
-p, --dev-path=<path> path to MTD device node to attach
-m, --mtdn=<number> MTD device number to attach (alternative method, e.g
if the character device node does not exist)
-O, --vid-hdr-offset VID header offset (do not specify this unless you really
know what you are doing, the default should be optimal)
-b, --max-beb-per1024 maximum expected bad block number per 1024 eraseblock.
The default value is correct for most NAND devices.
Allowed range is 0-768, 0 means the default kernel value.
-h, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubiattach.mtd-utils with parameter --help
ubiattach version 2.1.3 - a tool to attach MTD device to UBI.
Usage: ubiattach [<UBI control device node file name>]
[-m <MTD device number>] [-d <UBI device number>] [-p <path to device>]
[--mtdn=<MTD device number>] [--devn=<UBI device number>]
[--dev-path=<path to device>]
[--max-beb-per1024=<aximum bad block number per 1024 blocks>]
UBI control device defaults to /dev/ubi_ctrl if not supplied.
Example 1: ubiattach -p /dev/mtd0 - attach /dev/mtd0 to UBI
Example 2: ubiattach -m 0 - attach MTD device 0 (mtd0) to UBI
Example 3: ubiattach -m 0 -d 3 - attach MTD device 0 (mtd0) to UBI
and create UBI device number 3 (ubi3)
Example 4: ubiattach -m 1 -b 25 - attach /dev/mtd1 to UBI and reserve
25*C/1024 eraseblocks for bad block handling, where C is the flash
is total flash chip eraseblocks count, that is flash chip size in
eraseblocks (including bad eraseblocks). E.g., if the flash chip
has 4096 PEBs, 100 will be reserved.
-d, --devn=<number> the number to assign to the newly created UBI device
(assigned automatically if this is not specified)
-p, --dev-path=<path> path to MTD device node to attach
-m, --mtdn=<number> MTD device number to attach (alternative method, e.g
if the character device node does not exist)
-O, --vid-hdr-offset VID header offset (do not specify this unless you really
know what you are doing, the default should be optimal)
-b, --max-beb-per1024 maximum expected bad block number per 1024 eraseblock.
The default value is correct for most NAND devices.
Allowed range is 0-768, 0 means the default kernel value.
-h, --help print help message
-V, --version print program version
[*] Emulating binary ./usr/sbin/ubiattach.mtd-utils with parameter --version
ubiattach (mtd-utils) 2.1.3
[*] Emulating binary ./usr/sbin/ubiattach.mtd-utils with parameter version
ubiattach: error!: MTD device to attach was not specified (use -h for help)
-----------------------------------------------------------------
